Filter
Top Products
Shows the registration number of the cellular
phone.
3 Device name
Shows the device name of the cellular phone.
4 Phone number
Shows the phone number you selected.
5 Voice recognition indicator
Shows when the voice recognition function is
on (for more details, refer to Voice recognition
on the next page).
6 Incoming call notice indication
Shows when an incoming call has been re-
ceived and not checked yet.
! Incoming call notice is not displayed for
calls made when your cellular phone is
disconnected from this unit.
7 Automatic answering/Automatic rejecting in-
dicator
Shows when the automatic answering func-
tion is on (for more details, refer to Setting the
automatic answering on page 69).
Shows when the automatic rejecting function
is on (for more details, refer to Setting the
automatic rejecting on page 69).
8 Battery strength indicator
Shows the battery strength of cellular phone.
! Battery strength indicator may differ
from the actual battery strength.
! If the battery strength is not available,
nothing is displayed in the battery
strength indicator area.
9 Signal level indicator
Shows the signal strength of cellular phone.
! Signal level indicator may differ from
the actual signal level.
! Depending on the cellular phones fea-
turing Bluetooth wireless technology,
radio field intensity is not available. In
this case, the signal level indicator does
not appear.
! If your cellular phone is out of service,
is displayed.
a Telephone indicator
Shows when a phone connection using Blue-
tooth wireless technology is established (for
more details, refer to Connecting a cellular
phone on the next page).
! While connecting automatically, tele-
phone indicator is flashing.
% Touch the source icon and then touch
TEL to select the telephone.
Note
Equalizer curve for the phone source is fixed.
When selecting the phone source, you cannot op-
erate the equalizer function. Refer to Recalling
equalizer curves on page 34.
When the multi-channel processor is connected
to this unit, you can operate the equalizer func-
tion even when selecting the phone source. Refer
to Recalling equalizer curves on page 84.
Setting up for hands-free phoning
Before you can use the hands-free phoning
function you will need to set up the unit for
use with your cellular phone. This entails es-
tablishing a Bluetooth wireless connection be-
tween this unit and your phone, registering
your phone with this unit, and adjusting the
volume level.
1 Connection
For detailed instructions on connecting your
phone to this unit via Bluetooth wireless tech-
nology, refer to Connecting a cellular phone on
the next page.
# Your phone should now be temporarily con-
nected; however, to make best use of the technol-
ogy, we recommend you register the phone to
this unit.
2 Registration
To register your temporarily connected phone,
refer to Registering connected cellular phone
on page 65.
Available accessories
En
63
Section
04
Available accessories