Filter
Top Products
Operating Other Components Using Remote Controller
32
■
Resetting the REMOTE MODE Buttons
You can reset a REMOTE MODE button to its default
remote control code. Note that only one REMOTE MODE
button can be reset in this procedure.
1.
Press HOME for 3 or more seconds while holding
down the REMOTE MODE button to which you want to
program the remote control code.
The remote indicator lights.
2.
Within 30 seconds, press the REMOTE MODE button
again. Reset is complete when the remote indicator
flashes twice.
To reset the remote controller to its factory defaults:
While holding down RCV, press and hold down HOME for
about 3 seconds until the remote indicator lights. Press
RCV again within 30 seconds. Reset is complete if the
remote indicator flashes twice.
TV operation
Press the REMOTE MODE button programmed with
the remote control code for the relevant AV component
to switch the remote controller mode to that for the AV
component. Then, operate by using the corresponding
buttons. Available buttons vary depending on the product
category of the component. Note that some buttons may
not work, or the remote controller may not work at all with
some components.
1
2
3
4
1
REMOTE MODE
2
, INPUT, VOL
/
3
MUTING
4
CH +/
–
5
8
9
6
7
F
5
GUIDE
6
/
/
/
, ENTER
7
SETUP
8
PREV CH
9
RETURN
F
AUDIO (
)
G
H
I
J
G
, , , , , , (
)
H
A (Red) (
), B (Green) (
), C (Yellow) (
), D (Blue) (
)
I
Number 1~9, 0, +10
J
CLR, DISPLAY
¼
Not CEC-compatible.
Blu-ray Disc player/DVD player/DVD recorder
operation
Press the REMOTE MODE button programmed with
the remote control code for the relevant AV component
to switch the remote controller mode to that for the AV
component. Then, operate by using the corresponding
buttons. Available buttons vary depending on the product
category of the component. Note that some buttons may
not work, or the remote controller may not work at all with
some components.
1
2
3
4
1
REMOTE MODE
2
SOURCE
3
MUTING
4
CH +/–, DISC +/–