Filter
Top Products
Advanced Settings
26
Setting item Default Value Setting Details
Auto Standby On/Off This function places the unit on standby
automatically after 20 minutes of inactivity
without any video and/or audio input.
"On": To place the unit on standby automatically.
("ASP" flashes on the display.)
"Off": Not to place the unit on standby
automatically,
"Auto Standby" is appeared on the display
and menu screen 30 seconds before the Auto
Standby comes on.
"Auto Standby" does not work when Zone 2 is
active.
Default values vary depending on the regions.
HDMI Through Off Enables/Disables the "Auto Standby" setting
when "HDMI Through" setting is on.
"On": Enable this function
"Off": Disable this function
This setting is fixed to On when setting "Auto
Standby" to "Off".
Update Notice Enable This function notifies the availability of a firmware
update via network.
"Enable": Notify updates
"Disable": Do not notify updates
Version - The current firmware version is displayed.
Update via NET - Press ENTER to select when you want to update
the firmware via network.
You will not be able to select "Update via
NET" if you do not have Internet access or
there is nothing to update.
Update via USB - Press ENTER to select when you want to update
the firmware via USB.
You will not be able to select "Update
via USB" if a USB storage device is not
connected or there is nothing to update in the
USB storage device.
11. HDMI Setup
Setting Item Default Value Setting Details
HDMI CEC (RIHD) Off Setting to "On" enables the input selection link
and other link functions with HDMI connected
CEC compliant device.
"Off": When not using this function.
Depending on the TV set, a link may need to
be configured on the TV.
When this setting is set to "On", closing the
on-screen menu displays the name of the
CEC-compatible devices and "RIHD On" on
the display.
When this setting is set to "On", power
consumption in standby mode may increase.
(Depending on the TV status, the unit will
enter the normal standby mode.)
When this setting is set to "On" and you are
listening to the audio through the speakers
of your TV, operating the MASTER VOLUME
control of the unit outputs audio from the
speakers connected to the unit. If you want
to output audio from either of the unit or TV,
change the unit or TV settings, or reduce the
volume of the unit.
If misbehavior occurs when this setting is set
to "On", set this setting to "Off".
When connecting a non-CEC compatible
component, or when you are not sure whether
it is compatible, set the setting to "Off".
When making the change to this setting,
turn off and then on again the power of all
connected components.