Filter
Top Products
Advanced Settings
24
Setting item Default Value Setting Details
Center Width (PLII
Center Width)
3 Configure the settings to use for playing any 2
ch digital source such as Dolby Digital, or 2-ch
analog/PCM source in the Dolby Prologic II
Music listening mode. Allows you to configure the
width of the sound from the center speaker.
"0" to "7": Smaller the setting value is,the sound
is gathered to the center, and larger the setting
value is, the sound is distributed to the front left
and right speakers.
Center Image
(Neo:6 Center
Image)
2 Allows you to configure the width of the front
sound field when playing in the DTS Neo:6 Music
listening mode.
"0" to "5": Smaller the setting value is, the front
sound field is gathered to the center, and larger
the setting value is, the front sound field is
distributed to the front left and right speakers.
Listening Angle Wide Set the angle of the front left and right speakers
relative to the listening position when playing in
the Theater-Dimensional listening mode.
"Narrow": Less than 30°
"Wide": Greater than 30°
Values recommended for "Listening Angle" are 20° when "Narrow" is selected, and 40° when "Wide"
is selected.
9. Source Setup
The setting can be separately set to each input selector button. Select the input selector to
configure.
Setting Item Default Value Setting Details
AccuEQ Off Allows you to disable or enable the sound field
correction set on automatic speaker setup.
"On": Enable this function
"Off": Disable this function
In the following cases, the settings cannot be
changed:
㽎
Automatic Speaker Setup is not being
performed.
㽎
Headphones are connected.
Name - Allows you to rename the currently selected input
selector for easy identification.
Same name cannot be set for multiple input
selectors. Moreover, a name cannot be
configured for the input selectors "AM", "FM",
"NET", "USB", and "BLUETOOTH".