Filter
Top Products
Advanced Settings
25
Setting Item Default Value Setting Details
Audio Selector - Allows you to select prior input source.
"ARC": When giving priority to input signal from
ARC compatible TV.
This setting can be selected when "Audio
Return Channel" is set to "Auto" and when
“TV/CD” is selected.
"HDMI": When giving priority to input signal from
HDMI jacks.
This setting can be selected only when the
input selector to set is assigned to the HDMI
IN jack in the "HDMI Input" setting.
"COAXIAL" (Coaxial input): When giving priority
to input signal from DIGITAL IN COAXIAL jacks.
This setting can be selected only when
the input selector to set is assigned to the
COAXIAL jack in the "Digital Audio Input
(Digital Audio Input)" setting.
"OPTICAL" (Optical input): When giving priority
to input signal from DIGITAL IN OPTICAL jack.
This setting can be selected only when
the input selector to set is assigned to the
OPTICAL jack in the "Digital Audio Input
(Digital Audio Input)" setting.
"Analog": To always output analog audio
independently of the input signal.
Fixed Mode Off Specify an input signal when "HDMI",
"COAXIAL", or "OPTICAL" is selected for "Audio
Selector". Set this item if noise is produced, or
truncation occurs at the beginning of a track that
follows a gap when playing PCM or DTS sources.
"Off": To play an analog signal when there is no
digital signal.
"PCM": To fix the input source to PCM.
"DTS": To fix the input source to DTS (except for
DTS-HD).
Changing "Audio Selector" setting changes
"Fixed Mode" to "Off".
In the following cases, the settings for "Source Setup" cannot be changed:
㽎
Automatic Speaker Setup is not being performed.
㽎
When selecting the input selectors "AM", "FM", "NET”, “USB”, “BLUETOOTH”.
10. Hardware (Hardware Setup)
Setting item Default Value Setting Details
Volume OSD On This function displays the volume level on the TV
screen during volume level adjustment.
"On": The volume level is displayed on TV screen.
"Off": The volume level is not displayed on TV
screen.
Remote ID 1 Select an ID for the remote controller to be used
with the unit from "1", "2", and "3", and set it to
differentiate this unit's remote controller from
those used with other Onkyo components when
multiple components are used in the same room.
If you change the ID on the unit, set the remote
controller ID to the same value accordingly to the
procedure below.
1. While holding down RCV, press Q SETUP
for about 3 seconds until the remote indicator
lights.
2. Press either 1, 2, or 3 using the number
buttons. The remote indicator flashes twice.
AM/FM Freq Step
(North American
and Taiwanese
models)
10kHz/
200kHz
Select the frequency step according to your area.
Select from "10kHz/200kHz" or "9kHz/50kHz".
When the "AM/FM Frequency Step (AM
Frequency Step)" setting is changed, all radio
presets are deleted.
AM/FM Freq
Step (European,
Australian and Asian
models)
9kHz Select the frequency step according to your area.
Select from "10kHz/200kHz" or "9kHz/50kHz".
When the "AM/FM Frequency Step (AM
Frequency Step)" setting is changed, all radio
presets are deleted.