Filter
Top Products
68
Using a Macro function
Erasing a macro from the MODE MACRO
button
1. Press and hold down the desired MODE
button, press the MODE MACRO button, and
then release both buttons.
When you press the MODE button, the SEND/LEARN
indicator lights and that mode appears in the display. When
you press the MODE MACRO button, the indicator turns off.
When you release the buttons, the indicator flashes once and
“M 01” appears in the display.
2. Press the MODE MACRO button again.
The SEND/LEARN indicator flashes twice slowly and
“CLEAR” appears in the display. The macro programmed to
the MODE button pressed in Step 1 above is erased.
Note:
• If no button is pressed for more than 30 seconds during the
programming, the SEND/LEARN indicator flashes three
times quickly, “ERROR” appears in the display, and the
remote controller exits the programming mode. Resume from
Step 1.
• Be aware that if you press a button other than MODE MACRO
button in Step 2, then you will in effect be overwriting the
previous macro with a new macro.
Erasing a direct macro from the DIRECT
MACRO button
1. Press and hold down any one of the eight
MODE buttons, press the DIRECT MACRO
button, and then release both buttons.
When you press the MODE button, the SEND/LEARN
indicator lights and that mode appears in the display. When
you press the DIRECT MACRO button, the indicator turns off.
When you release the buttons, the indicator flashes once and
“M 01” appears in the display.
2. Press the DIRECT MACRO button again.
The SEND/LEARN indicator flashes twice slowly and
“CLEAR” appears in the display. The macro programmed to
the DIRECT MACRO button is erased.
Note:
• If no button is pressed for more than 30 seconds during the
programming, the SEND/LEARN indicator flashes three
times quickly, “ERROR” appears in the display, and the
remote controller exits the programming mode. Resume from
Step 1.
• Be aware that if you press a button other than DIRECT
MACRO button in Step 2, then you will in effect be
overwriting the previous direct macro with a new direct macro.
OPEN/CLOSEREC
AUDIO MUTING
DISCTRACK
DVD
CD
PH
TUN
T2T1
V1
STEREO
123
654
7
+
10 0
ENT
89
SURROUND THX DSP
LEVEL
+
CH SELRe-EQ
LEVEL
–
DIMMER
HOME THEATER CONTROLLER
RC-390M
LATE NIGHT
DIRECT DSP
V2 V3 V
–
MODE MACRO
OPEN/CLOSEREC
AUDIO MUTING
DISCTRACK
DVD
CD
PH
TUN
T2T1
V1
STEREO
123
654
7
+
10 0
ENT
89
SURROUND THX DSP
LEVEL
+
CH SELRe-EQ
LEVEL
–
DIMMER
HOME THEATER CONTROLLER
RC-390M
LATE NIGHT
DIRECT DSP
V2 V3 V
–
DIRECT MACRO
MODE buttons
MODE buttons