Onkyo TX-DS787 Stereo Receiver User Manual


 
55
Of course the TX-DS787 can also be used to record an input
source media. This allows you to make copies of the music or
videos you like, copy them from one type of media to another, or
even record what is being broadcast on television or radio. Be
aware that the Rec Out and Zone 2 buttons use the same circuit so
that you cannot make recording and output to the remote zone
(Zone 2) at the same time.
To record the input source signal you are
currently watching or listening to
This method outputs to the audio and video outputs the currently
selected input source signal. This method allows you to a signal
while you are actually listening to or watching it.
1. Select the input source to record by pressing
the corresponding input source button.
The input source is now selected and you may watch or listen
to it as desired.
2. Press the REC OUT button repeatedly until
Rec Sel:SOURCE appears in the front
display.
The currently selected input source signal to the TAPE OUT,
VIDEO 1 OUT, VIDEO 2 OUT outputs for recording.
Recording a source
Notes:
If you change the input source during recording, you will
record the signals from the newly selected input source.
You cannot record the surround effects.
Digital signals input to the DIGITAL INPUT (COAXIAL) and
DIGITAL INPUT (OPTICAL) inputs will be output to the
DIGITAL OUTPUT (OPTICAL) output.
Digital input signals are only output to the digital outputs and
analog input signals are only output from the analog outputs.
There is no conversion from digital to analog or vice versa.
When connecting CD players and other digital components, do
not connect only the digital terminals, but the analog ones as
well.
There are some restrictions on recording digital signals. When
making digital recordings, consult the instruction manual that
came with your digital recording equipment (e.g., MD
recorder or DAT deck) to know what restrictions are imposed.
You cannot record the source connected to the MULTI
CHANNEL INPUT connector.
3. Start recording at the recording component as
desired.
To confirm the settings, press the Rec Out button. The current
settings will appear for 3 seconds in the front display.
TUNING
UPDOWN
FM
MUTE
/
MODE
DISPLAY STEREO
CHARACTER
/
MEMORY
DIRECT THX
SURROUND
BASS
/
TREBLE
EXIT
MENU
LISTENING
MODE
ZONE 2 VOL
CH LEVEL
FM
AM PHONO C
D
TAPEDVD
VIDEO
3
VIDEO
4
VIDEO
2
VCR
2
VIDEO
1
VCR
1
STANDBY/
ON
POWER
ANDBY
ST
ZONE
2
OFF
ON
REC OUT ZONE
2
PHONES
AV
RECEIVER
TX-DS
787
MASTER VOLUME
VIDEO AUDIOLR
VIDEO CAM INPUT/4
VIDEO
S VIDEO
AUDIO SELECTOR
PUSH TO ENTER
SMART SCAN
CONTROLLER
DSP/
PRESET
REC OUT
/
DTS
RT/PTY/
TP
Input source buttons