Filter
Top Products
47
Menu
1.Speaker Setup
2.Input Setup
3.Listening Mode Setup
4.Preference
5.OSD Setup
|ENTER| Quit:|OSD|
5.OSD Setup
1.OSD Config
2.OSD Setup
3.OSD Position
|ENTER| Quit:|OSD|
5-3.OSD Position
Exit:|EXIT| Quit:|OSD|
VIDEO 1
Hint:
If this is set to “Off,” the background color will not be displayed
even when there is no video signal input.
d. Display Position
Use this setting to select the position of the immediate display that
appears when certain operations are performed. You can position
the immediate display at any of ten different levels ranging from
the top all the way to the bottom.
Menu
1.Speaker Setup
2.Input Setup
3.Listening Mode Setup
4.Preference
5.OSD Setup
|ENTER| Quit:|OSD|
5.OSD Setup
1.OSD Config
2.OSD Setup
3.OSD Position
|ENTER| Quit:|OSD|
5-2.OSD Setup
a.Background Color
:Blue1
b.Superimpose Mode
:Normal
c.Immediate Display
:On
d.Display Position
:Bottom
Quit:|OSD|
5-3. OSD Position sub-menu
This sub-menu allows you to adjust the position of the OSD menu
as it is displayed on your screen. Depending on the monitor used,
there may be cases where the OSD menu is not displayed in the
center and parts of the menus are cut off. To adjust the position of
the OSD menu, simply press the cursor buttons to inch the menu to
position you desire.
OSD Setup
a. Background Color
Select either Blue1, Blue2, Green1, Green2, Magenta, Red1, or
Red2 as the background color while the OSD menu is displayed.
b. Superimpose
Off: Select to have the OSD menu displayed on the selected
background color.
Normal: Select to have the OSD menu superimposed over the
current video if one is displayed or on the selected background
color if there is no video signal.
Black: Select to have the OSD menu displayed on a black
background at all times.
c. Immediate Display
On: Select this to have the screen immediately display certain
operations as you perform them. The display will remain for a
few seconds after the operation is completed.
5-2. OSD Setup sub-menu
This sub-menu allows you to customize the OSD menu to display
in the manner you desire.
Off: Select this to turn off the immediate display of operations.