Onkyo TX-DS787 Stereo Receiver User Manual


 
50
Selecting a preset radio station
1. Press either the AM or FM input source
button. The front display should show the
currently selected frequency. If it displays the
listening mode, press the DISPLAY button to
display the frequency.
2. Turn the SSC dial and select the number of the
desired preset station.
When using the remote controller:
1. Make sure that AUDIO is shown in the
remote controller display and press the TUN
button.
If AUDIO is not displayed, first press the AUDIO/TAPE
MODE button to display AUDIO and then press the TUN
button.
2. Press the CH button and select the number
of the desired preset station.
Listening to Radio Broadcasts
AUTO
TUNED
ch
MEMORY
Flash
Light
This programs the radio station as a preset radio station.
Up to 40 stations can be stored in memory as preset radio
stations.
You can enter text names for any of the preset radio
stations (see page 57).
Presetting a radio station
1. Tune into the radio station you desire (see
Tuning into a radio station ).
2. Press the CHARACTER/MEMORY button on
the front panel.
3. Turning the SSC dial, select a preset number
(from 1 to 40) to assign the station to be
preset.
4. Press the SSC dial to finalize the procedure.
MEMORY
Light
AUTO
TUNED
ch
MEMORY
Erasing a preset radio station
1. Press the AM or FM button and turn the SSC
dial to select the preset radio station that you
want erase (see above).
2. Press the CHARACTER/MEMORY button.
Preset Erase? appears.
3. Press the SSC dial.
The selected preset station is erased.
MEMORY
MEMORY
Preset in? appears in the front display. Press the SSC dial.