Filter
Top Products
En-
46
Using the Timers
—Continued
Once timed playback has started, pressing a [SNOOZE]
button will stop playback for a set number of minutes.
Once the snooze time has expired, playback will start
again, just like the snooze function you find on a typical
alarm clock. The default snooze time is 5 minutes, but
can be set from 1 to 30 minutes in 1-minute increments.
While the timed playback is within the specified On and
Off times, you can use the Snooze function any number
of times.
Timer Setting
When setting the timer, select Snooze On (see page 43).
When timer programming is complete, an underscore
appears below the timer’s number, indicating that the
Snooze function can be used with that timer.
Snooze in Use
Once timed playback has started, press the remote con-
troller’s [SNOOZE] button or a SNOOZE button on the
CBX-300’s top panel (see above illustration) to snooze.
Playback will stop temporarily and the snooze time will
be shown on the display. Once the snooze time has
expired, playback will start again.
Setting the Snooze Time
You can change the snooze time, but only during timed
playback (i.e., while the timer is On).
Notes:
• If you press a [SNOOZE] button while the CBX-300
is snoozing, the snooze period will start again.
•To cancel snooze while the CBX-300 is snoozing,
press the [STANDBY/ON] button. The timer will be
turned off and the CBX-300 will go on Standby.
• When a timer is set with Snooze On, during timed
playback, the Previous [ / ], Next [ / ],
CD Play/Pause [ ], Stop [ ], and Eject [ ] but-
tons on the CBX-300’s top panel work as SNOOZE
buttons. To use the functions normally performed by
these buttons, use the equivalent buttons on the remote
controller instead. To eject a CD with the Eject [ ]
button, either wait until the timer has turned itself off
at the programmed Off time, or cancel the timer by
pressing the [TIMER] button.
•Even if the CBX-300 is snoozing, at the Off time pro-
grammed for the timer, the CBX-300 will go on
Standby and playback will not start again.
Using the Snooze Function
SNOOZE
SNOOZE
ENTER
Press the [SNOOZE] button to
snooze. While the snooze time is
displayed brightly for 8 seconds,
use the Previous and Next [ ]/
[] buttons to set the snooze
time from 1 to 30 minutes.
The new snooze time will be used the
next the Snooze function is used.
/