Onkyo CBX-300 CD Player User Manual


 
En-
31
Playing Your iPod
—Continued
Note:
Depending on your iPod model, or the type of content being played, some functions may not work as expected.
Notes:
Menu items can only be selected while the dot is
shown on the right-hand side of the CBX-300’s dis-
play (Menu mode). During this time, the Next [ ]
and Previous [ ] buttons cannot be used to select
tracks.
If the iPod returns to its “Now Playing” screen but the
dot is still displayed, wait until the dot disappears, or
press the CD Stop [ ] button to cancel the CBX-300’s
Menu mode before you use the Next [ ] and Previ-
ous [ ] buttons to select tracks.
When navigating the iPod’s menus with the
CBX-300’s remote controller, do not operate any of
the buttons on your iPod, as those operations will not
be recognized by the CBX-300 and will disrupt the
CBX-300’s control of the iPod.
Using the Remote Controller
Select songs
Press the Previous [ ] button to
locate the beginning of the currently
playing or paused track. Press it repeat-
edly to select earlier tracks.
Press the Next [ ] button repeatedly
to select subsequent tracks.
When a menu is displayed, these but-
tons select menu items.
Select albums
During playback, press the Up [ ] button
to select the next album; press the Down
[] button to select the previous album.
Select the iPod as the source
Set the Shuffle function to Songs,
Albums, or Off
Use the iPod’s Settings menu to confirm
which mode is selected.
Turn on the iPod’s backlight
The backlight stays on for 30 seconds.
Fast forward and rewind
Press and hold down to fast forward or
rewind during playback or when playback is
paused.
Cancel the CBX-300’s Menu mode
Select playlists
During playback, press the Up [ ] button
to select the next playlist; press the Down
[] button to select the previous playlist.
View the menu
Select menu items
Set the Repeat function to One, All,
or Off.
Start or pause playback
Pressing this button while the CBX-300 is
on Standby will turn on the CBX-300 and
start playback.
Navigating the iPod Menus with the Remote Controller
1
Press the MENU/NO/CLEAR but-
ton to view the menu.
Press it again to go back to a previous
menu.
A dot appears on the right-hand side of
the CBX-300’s display indicating that a
menu is being displayed on the iPod.
This Menu mode.
2
Use the Next [ ] and Previous
[] buttons to select an item on
the menu, and then press
[ENTER].
Operating Note:
The volume level is adjusted by using the VOLUME
[/] buttons on the CBX-300 or its remote control-
ler. Adjusting the volume on your iPod has no effect.
In case you inadvertently move your iPod’s volume
control, make sure the volume level is not set too high
before you reconnect your headphones.