Onkyo CBX-300 CD Player User Manual


 
En-
30
Playing Your iPod
The 3rd Generation iPod is not supported.
Notes:
Before using your iPod with the CBX-300, be sure to
update your iPod with the latest software, available
from the Apple Web site.
If you leave your iPod paused when using it on its
own, eventually it will go into hibernation. If you
insert it into the CBX-300 dock in this state, you’ll
need to wait a few moments before your iPod is ready
for use.
•Always remove your iPod from the CBX-300 before
moving the CBX-300.
Selecting Tracks
To return to the beginning of the
track that’s currently playing or
paused, press the Previous
[/] button.
Press the Previous [ / ] button repeatedly to select
earlier tracks.
Press the Next [
/
] button repeatedly to select
subsequent tracks.
Fast Forward and Rewind
To fast forward or rewind during
playback or while playback is
paused, press and hold down the
Next [ / ] or Previous
[/] button, respectively.
Pausing Playback
To pause playback, press the iPod
Play/Pause [ ] button.
The Pause indicator appears
on the iPod. Press the iPod
Play/Pause [ ] button again
to resume playback.
iPod Backlight
To turn on your iPod’s backlight,
press the [DISPLAY] button. The
backlight will remain on for 30
seconds.
Using the Top Panel Buttons
/
DISPLAY
iPod
1
Insert your iPod into the
CBX-300’s iPod dock.
Make sure your iPod is properly seated
in the CBX-300’s iPod dock.
The iPod will enter Pause mode.
Notes:
Remove the CBX-300’s protective
iPod dock cover, and be sure to install
the appropriate dock adapter before
inserting your iPod (see page 15).
•To prevent damage to the dock con-
nector, do not twist or force your iPod
into the dock, and be careful not to
wiggle your iPod while inserting it.
Do not use with any iPod accessories,
such as FM transmitters and micro-
phones, as they may cause a malfunc-
tion.
If you use a case with your iPod,
always remove it before you insert it.
Otherwise, it may not connect prop-
erly and a malfunction may occur.
2
Press the iPod Play/Pause
[] button.
Playback starts.
Tip:
If you press the iPod Play/Pause
[] button while the CBX-300
is on Standby, it will turn on automat-
ically and the iPod will start playing.
iPod
iPod dock
/
/
Press and hold
/
/