Filter
Top Products
63
TUNER12
SOURCE34
SOURCE
POWER OR
DISCRETE "ON"
DISCRETE "OFF"
SOURCE
5
7
6
8
IR COMMANDS
POWER
PROGRAM
ENTER
IR
SEQUENCE
NEXT
RED LED GREEN LED
The PROGRAM LED
lights RED.
SYSTEM PROGRAMMING STEPS
PROGRAMMING IR COMMANDS
The SEQUENCE
LED lights RED.
The TUNER 1/2 LED lights
RED indicating Tuner 1.
PROGRAM
ENTER
IR
NEXT
Step 1 - Press and hold
the PROGRAM button.
Step 2 - To program a sequence for Tuner 1, press the keys on the Niles R-8 Remote that correspond to the commands
you wish to include in the sequence. Otherwise, press the NEXT button and skip to Step 3.
Enter commands and delays from the ZR-8630AV Programming Worksheet in the order you wish them to occur. The
sequence may include as many as 64 commands and/or delays. To include a delay, use the Volume + key (1 second) or
Volume - key (.5 second).
The ENTER IR LED blinks when
it receives a command.
After entering all commands and/or delays for
the Tuner 1 sequence, press the
NEXT button.
The SEQUENCE
LED lights RED.
The
TUNER 1/2 LED lights
GREEN indicating Tuner 2.
The
PROGRAM
LED lights RED.
TUNER12
SOURCE34
SOURCE
POWER OR
DISCRETE "ON"
DISCRETE "OFF"
SOURCE
5
7
6
8
IR COMMANDS
POWER
PROGRAM
ENTER
IR
SEQUENCE
NEXT
RED LED GREEN LED
TUNER12
SOURCE34
SOURCE
POWER OR
DISCRETE "ON"
DISCRETE "OFF"
SOURCE
5
7
6
8
IR COMMANDS
POWER
PROGRAM
ENTER
IR
SEQUENCE
NEXT
RED LED GREEN LED