Filter
Top Products
- 6 -
Quick Start
Follow the instructions on this page to Quick Start your
new PMD670 Portable Solid State Recorder and begin
recording.
Note: Outside of the USA a CF card is not included.
See page 41 for installing a CF card and page 22 to
format a CF card.
a. Plug AC adapter into
household power.
b. Plug the adaptor jack into the PMD670 at DC IN
13V.
2. Slide the POWER switch to the right and release.
On first power up, wait
for the PMD670 to
initialize.
A full display will
appear momentarily.
The display will change
to Loading then to
Reading.
The display will change
to this display for a
newly formatted CF
card.
POWER
MARK
TRACK
TOTALTRACKTIME
REC REMAINkbps
A-B
L
R
-dB
PM
kHz
AM
INT
MIC
LINE
S.SKIP
-dB
over
0
26
12
20
40
00
L
R
-dB
over
0
26
12
20
40
00
-dB
L
R
-dB
over
0
26
1220
40
00
-dB
INT
MIC
TRACKTIME
TRACK
The Rec indicator (a)
will be lit and steady
while recording.
b
c
4. Push and release the STOP button to stop record-
ing and end the track (close the audio file).
REC
The display will
show the recording
time (b) of the
current track (c).
The display will
show the remaining
recording time at
current settings for
the CF
card.
a
TIME
REC REMAIN
L
R
-dB
over
0
26
1220
40
00
-dB
INT
MIC
STOP
DC IN 13V
a. Plug the AC adapter in.
b. Slide the POWER switch to turn on.
c. Slide the REC switch to start recording.
d. Push and release REC PAUSE when record-
ing is not necessary.
e. Slide the REC switch to resume recording.
f. Push the STOP button to stop recording.
POWER
CANCEL
STOP
REC
REC PAUSE
DC IN 13V
a.
b.
c. e.
d.
f.
Quick Start Basic Instructions
To transfer audio files to your computer:
transfer the CF card, see page 37,
or
connect via I/O, see page 43.
L
R
-dB
over
0
26
1220
40
00
-dB
INT
MIC
Quick Start Detailed Instructions
The PMD670 comes factory preset for recording voice
using its built-in (internal) microphone. These are
settings for recording a meeting, not settings for
recording a vocal performance. Quick Start ignores
your changing any of these presets, it even ignores
installing batteries.
1. Unpack the AC adapter and the PMD670.
example shows 4 hours 21 minutes and 02 seconds
remaining
3. Slide the REC button to the right and release.
Recording begins.