Filter
Top Products
- 34 -
Single Play
During playback, when Single Play and Auto Cue
are Off, and the end of a track is reached the
next track automatically starts playing.
During playback, when Single Play is On, and
the end of a track is reached the PMD670 auto-
matically pauses. This differs from Auto Cue in
that Single Play does not cue to start of audio.
Default is S.Play Off.
1. Select the S.Play menu choice:
a. From stop, press and hold the
MENU
button for about 2 seconds. MENU will
appear (flashing) in the display.
b. While MENU is flashing (for about 3 sec-
onds) press and release the ENTER button
. The last Menu choice selected will
appear.
(If the flashing MENU times out start over at
a.)
2. Press and release the FWD/+ button
repeatedly until S.Play is displayed and
flashing.
3. Press and release the ENTER button
to
accept the S.Play choice and switch to On or
Off.
4. Press and release the FWD/+ button
or
the -/REW button
to toggle between ON
and OFF.
5. When correct Press and release the ENTER
button
to switch to S.Play flashing.
6. Press and release the FWD/+ button
to
switch to another menu choice, or press and
release the
MENU/STORE button to write
the menu change(s) and return to stop mode.
Beep
When battery charge can provide no more than
1-3 minutes of recording or playback and Beep is
set to On, the battery indicator will flash, the REC
indicator will flash and the PMD670 will beep.
If the PMD670 is not operated for 30 minutes
during stop or play pause, power can be auto-
matically shut off to conserve battery life. (See
A.PowOFF next page.) If A.PowOFF is set to Y,
and Beep is set to ON, the PMD670 will beep to
alert you that the power is shutting off.
Default is Beep On.
1. Select the Beep menu choice:
a. From stop, press and hold the
MENU
button for about 2 seconds. MENU will
appear (flashing) in the display.
b. While MENU is flashing (for about 3 seconds)
press and release the ENTER button
.
The last Menu choice selected will appear.
(If the flashing MENU times out start over at
a.)
2. Press and release the FWD/+ button
repeatedly until Beep is displayed and flash-
ing.
3. Press and release the ENTER button
to
accept the Beep choice and switch to On or
Off.
4. Press and release the FWD/+ button
or
the -/REW button
to toggle between ON
and OFF.
5. When correct Press and release the ENTER
button
to switch to Beep flashing.