Filter
Top Products
- 39 -
Front
REC PAUSE
DISPLAY LIGHT
REC
LEVEL
L
R
REC
HP/SPK VOLUME
PHONES
KEY LOCK
1 2 3 4 5 6
HP/SPK VOLUM
E
MARK
TRACK
TOTALTRACKTIME
REC REMAINkbps
A-B
L
R
-dB
PM
kHz
AM
INT
MIC
LINE
S.SKIP
-dB
over
0
26
12
20
40
00
REC PAUSE
L
R
-dB
over
0
26
1220
40
00
-dB
INT
MIC
TRACKTIME
TRACK
b a c
L
R
-dB
over
0
26
1220
40
00
-dB
TRACKTIME
MARK
d e f
RE
C
REC
REC
LEVE
L
R
L
1. HP/SPK VOLUME control
Turn to adjust the volume of
headphones plugged into the
PHONE jack or the built-in
speaker.
Audio on the built-in speaker is automatically
interrupted when recording with the internal
microphone.
During playback what is heard on the L or R
headphone depends on the recording and for a
Stereo or Dual Mono recording, the setting of the
ANALOG OUT switch.
2. Display
See Display on
page 43 for
details.
3. REC PAUSE button
During recording push and
release to pause.
When paused the REC indicator will flash.
Example
display.
The Pause symbol (a) will be displayed.
The Record symbol (b) will flash in the display
The Level meter (c) will remain active.
To resume recording slide the REC switch to the
right and release.
A REC PAUSE does not increment the track.
If the AUTO MARK switch is at ON, a REC
PAUSE adds an EDL mark. When recording is
resumed the following is displayed for a couple of
seconds.
MARK (d) is displayed to indicate that the num-
ber (e) indicates the count of EDL marks.
"inTotal" (f) reminds you that EDL marks are
counted from the beginning the Flash memory
card not the beginning of the current track.
4. REC indicator
Red indicator light is lit
and steady during
Record, flashing during Record pause.
5. REC switch
From Stop slide to the
right and release to start
recording.
From REC PAUSE slide to the right and release
to resume recording.
During recording slide to the right and release to
increment the track (start a new audio file).
To stop recording press and release STOP .
6. REC LEVEL controls
Turn to adjust the
record level when the
LEVEL CONT. switch
is at MANUAL.
The inside control (Right channel) and outside
control (Left channel) turn together unless you
hold one while turning the other.
The optimum record level is when the level meter
goes as close to 0dB as possible but does not go
OVER.