Filter
Top Products
4
ONYX Satellite
ONYX Satellite
Besides being used for inserting external devices,
these jacks can also be used as channel direct outputs
(post-GAIN). This is an unbalanced direct out.
Here are three ways you can use the INSERT jacks:
Direct out with no signal interruption to master.
Insert only to first “click.”
Channel Insert jack
Channel Insert jack
Channel Insert jack
Direct out with signal interruption to master.
Insert all the way in to the second “click.”
For use as an effects loop.
(TIP = SEND to effect, RING = RETURN from effect)
MONO PLUG
MONO PLUG
STEREO
PLUG
5. OUTPUTS -6
These 1/4" TRS output connectors provide balanced
or unbalanced line-level analog signals. The signal at
the LINE OUTs are assigned in the DAW application as
follows:
Output 3 = Core Audio/ASIO out 3
Output 4 = Core Audio/ASIO out 4
Output 5 = Core Audio/ASIO out 5
Output 6 = Core Audio/ASIO out 6
6. CR OUT 1 and
These 1/4" TRS jacks provide a balanced line-level
signal that can be used to provide a monitor mix to a pair
of powered studio monitors, or an additional headphone
mix to a headphone amplifier.
There are two pairs of Control Room outputs labeled
A and B. These are selected using the A/B Select switch
[26] in the Control Room section on the front panel of
the base station. The same signal is routed to both stereo
control room outputs, as well as the PHONE
S 1 and 2
outputs.
7. FIREWIRE
When the pod is connected to the base station, the
FireWire connector on the base station is activated
and used to connect to your computer. It operates in
the same way as described for the FireWire connector
on the pod [13], except that up to six tracks can be
returned from your DAW to the Onyx Satellite instead of
just two.
8. POWER Connector
Normally, the Onyx Satellite can be powered from the
FireWire connector (which provides 12V DC for power-
ing devices). However, if you are using a 4-pin FireWire
connector instead of a 6-pin connector (the 4-pin
connector doesn’t provide power), or if you have two or
more devices daisy-chained on a single connector, you
need to use the AC adapter that came with your Onyx
Satellite.
Connect the AC adapter to the Onyx Satellite first,
then plug the adapter into a suitable and properly rated
AC outlet.
9. Kensington Security Slot
To help prevent theft, this security slot is designed to
fit the popular Kensington security locks. A variety of
models are available from their website at
www.kensington.com.
2INPUT
(TIP=SEND
RING=RETURN)
1
LINE LINE
INSERT
O
N
Y
X
M
I
C
P
R
E
4 3 2 1
6
5
B
OUTPUTS
(BAL/UNBAL)
LINE LINE
INSERT
O
N
Y
X
M
I
C
P
R
E
CR OUT
A
2/R 1/L
2/R 1/L
1INPUT
(TIP=SEND
RING=RETURN)
2