Filter
Top Products
38
english
JABRA PRO 9460, 9460DUO AND 9470 USER MANUAL
Choosing Voice or Tones for Target indicators
The headset is capable of playing either a tone or a human voice when you change the target phone, thus telling
you what the new target is. The human voice is always in English, regardless of your other language settings.
By default, the human voice will be played. However, if you do not like hearing the English voice, you can switch
to using the tones.
To change this setting, use the Jabra Control Center program of the Jabra PC Suite running on your PC. See the
online help for complete details.
Headset Visual Indicators (LED)
The headset includes a multicolor LED which indicates the state of the headset, as outlined in the table below.
During charging, the headset state LED indication is shown interspersed with a constant yellow light (which
shows the headset is charging). Once fully charged, only the state LED indication is shown (no charging light
while fully charged).
Headset state LED when battery level is good LED when battery level is low
Idle
Blue 200ms
O 4800ms
Repeats for 60 seconds
Red 100ms
O 4900ms
Repeats indenitely
Not connected
Green 300ms
O 300ms
Green 300ms
O 300ms
Green 300ms
O 1500ms
Repeats for 60 seconds
Red 100ms
O 500ms
Red 100ms
O 500ms
Red 100ms
O 1700ms
Repeats indenitely
Call active
Blue 100ms
O 300ms
Blue 100ms
O 2000ms
Repeats indenitely
Red 100ms
O 300ms
Red 100ms
O 2000ms
Repeats indenitely
Ringing
Blue 100ms
O 300ms
Blue 100ms
O 1000ms
Repeats indenitely
Red 100ms
O 300ms
Red 100ms
O 1000ms
Repeats indenitely