Filter
Top Products
17
english
JABRA PRO 9460, 9460DUO AND 9470 USER MANUAL
Placing the Headset in its Cradle
Whenever you are not using your headset, you should keep it in its recharge cradle as shown in the figure below.
It is held firmly in place by a magnet. Note that placing it in its cradle is sometimes called docking the headset.
When the headset is docked correctly in the cradle, an extra icon is displayed in the touchscreen’s status bar. See
the section “Using the Touchscreen”.
Figure 11: Inserting the headset into the cradle for storage and charging
connecting the BaSe to youR deSk Phone4.4
Identifying Your Desk Phone Features
The way you connect and configure the Jabra Pro base will vary according to the type of desk phone you are
using. Check your phone (by looking at its connectors and/or documentation) to see which of the following
features it has, then see the appropriate section below to learn how to connect your Jabra PRO base to the
phone:
- Standard desk phone
This type of phone does not include any built-in support for adding a headset. You will therefore connect
the Jabra PRO base between your desk phone’s handset and body, enabling you to use either the handset or
headset. All desk phones can be connected in this way.
- Desk phone with headset port
This type of phone provides a dedicated headset port (usually at the back of the phone). These phones
typically also have a button on the front panel for switching between the headset and handset.
- Desk phone with electronic hookswitch
This type of phone is able to place or answer a call automatically when you press the multifunction button
on your headset. This requires a desk phone that includes an electronic hookswitch feature and also requires
an extra adapter cable from Jabra. Please see our web site and/or refer to your telephone’s user manual for
details about electronic hookswitch compatibility.
- Desk phone with GN1000 Remote Handset Lifter
A handset lifter physically lifts your handset from your desk phone when needed, thereby creating a solution
that works similarly to an electronic hookswitch. The GN1000 Remote Handset Lifter is available separately;
please speak to your Jabra dealer for details.