Filter
Top Products
Unpacking Placement
1. Open the shipping box and remove the top
layer of foam. You see these items:
1 KPS 25sc
1 acrylic cover in velvet pouch
1 KPS 25sc tabletop remote control
1 KPS 25sc handheld remote control
2 packages of AAA-size 1.5 Volt batteries
(4 for tabletop remote control, 2 for
handheld remote control)
1 compact disc clamp
1 IEC connector (AC Power) cord
1 12 VDC (12 V trigger) cable
1
T-10 Torx wrench (for remote control
battery installation and removal)
1 cleaning kit for the acrylic cover
1 packet containing the owner’s
reference manual and the warranty
registration card
2. Carefully remove the unit and accessories
from the shipping box. Remove the foam
end caps and protective plastic wrap from
the KPS 25sc.
Notes
If any of these items are not included in the
shipping box, please contact your authorized
Krell dealer, distributor, or Krell for assistance.
Save all packing materials. If you ship your
KPS 25sc in the future, repack the unit in its
original packaging to prevent transit damage.
See Return Authorization Procedure, on
page 33, for more information.
Before you install the KPS 25sc into your sys-
tem, review the following guidelines to properly
place your component. This will facilitate a
clean, trouble-free installation. The KPS 25sc
does not require a special rack or cabinet for
installation. For the dimensions of the KPS 25sc,
see Specifications, on the back cover.
The KPS 25sc requires at least two inches (5
cm) of clearance on each side to provide for ade-
quate ventilation and at least 20 inches (50 cm)
of clearance above the component to allow for
the operation of the acrylic cover. Installations
inside cabinetry may need extra ventilation.
Note
The KPS 25sc incorporates an advanced sus-
pension system and does not require addition-
al mass coupling or isolation. You may experi-
ment with feet or cones as long as they are not
permanently affixed to the unit. Any unautho-
rized modifications to the unit or electronics will
void the warranty.
IMPORTANT
Do not attach enhancement accessories such
as rings, mats, or dampers to individual com-
pact discs. These accessories may interfere
with the compact disc transport, resulting in
erratic playback and/or poor sound.
AC POWER GUIDELINES
The KPS 25sc has superb regulation and does
not require a dedicated AC circuit. Avoid connec-
tions through extension cords or multiple AC
adapters. High quality 15 amp grounded AC
strips are acceptable. High quality AC line con-
ditioners or filters can be used if they are
grounded and meet or exceed the unit’s power
supply rating of 100 VA.
4
Krell KPS 25sc