Filter
Top Products
Customizing Configurations, continued
4. Rotate the level knob (25) or press level key
to select the input for THEATER THROUGHPUT.
5. Press the menu control button (29) or key
again to display the current theater mode
setting. The display reads YES when Theater
Throughput is active and NO when Theater
Throughput is inactive.
6. Rotate the level knob (25) or press
level key to YES to engage Theater Through-
put.
7. Press the menu control button (29) or key
lock in the setting.
8. Press the menu control button (29) or key
again to exit the menu mode.
IMPORTANT
Make sure that the source component is a sur-
round sound processor. Source components
that are not surround sound processors should
not be connected to an input configured for
Theater Throughput. Doing so can result in
excessive and possibly damaging volume lev-
els when the source component is played.
Always turn off the source component before
you configure any input on the KPS 25sc for
Theater Throughput.
To disengage an input from Theater
Throughput:
1,
Press the menu control button (29) or menu
key. The word MENU appears in the menu
display (26).
2. Rotate the level knob (25) or press level key
until the word THEATER appears.
3. Press the menu control button (29) or key
again. The word c[~ appears.
4. Rotate the level knob (25) or press level key
to select the input for Theater Throughput.
5. Press the menu control button (29) or key
again to display the current theater mode
setting. The display reads YES when Theater
Throughput is active and NO when Theater
Throughput is inactive.
6. Rotate the level knob (25) or press level key
NO to disengage Theater Throughput.
7. Press the menu control button (29) or key
lock in the setting.
8. Press the menu control button (29) or key
again to exit the menu mode.
AMPLIFIER CONTROL OPTIONS
These options are for users whose KPS 25sc is
connected to Krell Full Power Balanced ampli-
fiers or Master Reference Amplifiers with Krell
Link. The two amplifier control options are:
Auto. The amplifiers connected through Krell
Link automatically power on when you press
the KPS 25sc power button or key (factory
default).
Off. The KPS 25sc will turn on when you press
the power button or key, but the amplifiers will
remain off until powered on separately. If you
want your amplifiers to power on automatically
each time you power on the KPS 25sc, keep the
factory default. If you want to use the KPS 25sc
without powering on the amplifiers (for example,
if you frequently make recordings), then you
may wish to change the amplifier control option
from auto to off.
Krell KPS 25sc 29