Filter
Top Products
Remote Control, continued
See Figure 5 on page 17
Special Play Functions, continued
A/B Key
Use this key to create a loop between two pre-
determined points within a single track or
sequential tracks. See How to Create an AJB
Loop, on page 27.
Access Key
When an exact start position is critical, use the
direct number access keypad to numerically
select a position within a specific track program.
When you press the access key, the compact
disc display (1) shows zeros for track number
and time within each track.
Use the direct track access keypad to enter the
desired track number at the flashing zero. The
left zero, indicating time within the track, flashes.
Use the keypad again to enter the desired start
point on the track. Playback begins automatically.
Prog (Program) Key
Use this key to access the track programming
mode. Track programming lets you select the
tracks you want to hear in the order you want to
hear them. See How to Write a Program, on
page 26.
Digital Inputs
CD Key
Use this key to select the internal compact disc
transport.
AES Key
Use this key to select the corresponding rear
panel input that is connected to an AES digital
source.
Optics1 and Optics2 Keys
Use these keys to select the corresponding rear
panel input that is connected to an EIAJ fiber
optic digital source.
Coax1 and Coax2 Keys
Use these keys to select the corresponding rear
panel input that is connected to a S/PDIF coax-
ial source.
Track Functions
Pause Key
Use this key to temporarily suspend playback of
the current compact disc track. To resume play-
ing the track at the point pause was engaged,
press the play key.
Play Key
Use this key to start playback from the begin-
ning of the compact disc.
Stop Key
Use this key to stop compact disc playback.
Index (Back and Forward) Keys
Use the index back key to select the index num-
ber prior to the current index number within a
specific track. Use the index forward key to
select the index number following the current
index number within a specific track.
Note
These keys function only if the compact disc
has been recorded with separate indexing. If a
compact disc does not have indexing, the dis-
play defaults to the current track number when
the index keys are pressed.
Track (Back and Forward) Keys
Use the track back key to select and begin play-
ing the track that precedes the current track;
use the track forward key to select and play the
track that follows the.current track.
Search (Back and Forward) Keys
Press and hold these keys to scroll backward or
forward through the current track.
Krell KPS 25sc 19