Filter
Top Products
FIGURE 2 CONNE(;TING THE KPS 25sc FLEX FOIL CABLE
E
Front
Back
E.1
Open flex foil
receptacle
The open flex foil
receptacle sleeve is fully
extended, as shown. If
the flex foil receptacle
is not open, use your
fingers to grasp the
sleeve and gently slide
it toward the back of
the KPS 25sc, before
attempting to insert the
flex foil cable.
D
~
The closed flex foil
~,~j~
receptacle.
The flex foil cable
should be curved
E.2
Align the tip of the flex
foil cable parallel to the
open flex foil receptacle
and gently feed the flex
foil cable into the open
flex foil receptacle until
the cable touches the
rear of the receptacle.
slightly but not crimped.
Close the flex foil recep-
tacle by sliding the
sleeve toward the front
of the KPS 25sc.
Krell KPS 25sc