Filter
Top Products
Operating Your KPS 25sc, continued Customizing Configurations
HOW TO CREATE AN A/B LOOP
Press the play button (4) or key to begin play
a track. When you hear the part that you want as
the beginning of the loop, press A/B to insert the
start position. REPEAT A appears in the compact
disc display (1). Press A/B again to insert the fin-
ish position. REPEAT A--B appears in the compact
disc display., Playback of the loop automatically
begins and continues until the user stops it.
Press the stop button (3) on the front panel
stop key on the remote control to stop play or
press A/B again to delete the A/B program.
TO PLAY ANOTHER INPUT
SOURCE
1. After the KPS 25sc is initialized and in the
stand-by mode, use the power button (12)
key to switch the component to the opera-
tional mode. The blue power LED (13) illumi-
nates.
2. Select the analog or digital input source
using the front panel button or key.
3~ Follow the operating directions for the input
source.
This section provides instructions for customiz-
ing options, including cover and shutter opera-
tion, Theater Throughput mode, setting amplifi-
er control options, adjusting menu brightness,
assigning custom names to inputs, changing an
input’s volume trim, changing volume control
sensitivity, or returning all settings to the factory
defaults.
CHANGE THE COVER
OPERATION MODE
The cover operation mode lets you choose how
cover position affects compact disc playback.
The three cover operation modes are:
Off. The cover position does not affect compact
disc playback.
Auto. The cover must be down for compact
disc playback to begin. After the cover is down,
press the play button (4) or key to begin play-
back (factory default).
Auto play. Playback begins automatically as
the cover is closed.
To change the cover operation mode:
1.
Press the menu control button (29) or menu
key. The word MENU appears in the menu
display (26).
2. Rotate the level knob (25) or press level key
until the word COVER appears.
3. Press the menu control button (29) or key
again. The current cover operation mode
appears in the menu display.
4. Rotate the level knob (25) or press level key
to select the desired cover operation mode.
Krell KPS 25sc
27