Filter
Top Products
Front Panel Description
See Figure 3 on page 11
The front panel of the KPS 25sc accesses
power on and off, compact disc functions, digi-
tal and analog input selections, volume and bal-
ance control, menu selection, and mute. The
displays show the status of com pact disc play-
back and volume, balance, and menu.
Compact Disc Transport Functions
1 Compact Disc Display
The compact disc transport display shows the
track number of the compact disc that is playing
as well as programming and other status
information.
2 Pause Button
Use this button to temporarily suspend play-
back of the compact disc track. To resume play-
ing the track at the point pause was engaged,
press the play button (4).
3 Stop Button
Use this button to stop compact disc playback.
4 Play Button
Use this button to activate playback from the
beginning of the compact disc, or to resume
playback after pause. For more information,
see Operating Your KPS 25sc, on page 26,
and Customizing Configurations, on page
27.
5 HDCD
®
LED
The HDCD
®
LED illuminates when a High
Definition Compatible Digital
®
disc is playing,
indicating that HDCD
®
decoding is functioning.
6 SYNC LED
The SYNC LED illuminates when the KPS 25sc
digital input selection has locked on to a valid
signal from the internal transport or an external
source component.
7 Search Back Button
Press and hold this button to scroll backward
through the current track,
8 Search Forward Button
Press and hold this button to scroll forward
through the current track.
9 Track Back Button
Use this button to select and begin playing the
track that precedes the current track,
10 Track Forward Button
Use this button to select and begin playing the
track that follows the current track.
11 Drive Off Button
Use this button to turn the compact disc trans-
port on and off.
12 Power Button and Stand-by LED
Use this button to switch the KPS 25sc between
the stand-by and the operational modes. The
red power stand-by LED illuminates when the
KPS 25sc is in the stand-by mode.
13 Power LED
The blue power LED illuminates when the
KPS 25sc is in the operational mode. The blue
power LED also flashes when any remote con-
trol key is pressed.
12
Krell KPS 25sc