Filter
Top Products
KPS 25sc
Krell Playback System
with Krell CAST
Technology
v 00.1
Krell Industries, Inc.
45 Connair Road
Orange, CT 06477-3650 USA
TEL 203-799-9954
FAX 203-891-2028
E-MAIL krell @ krellonline.com
WEBSITE http://www.krellonline.com
This product complies with the EMC directive (89/336/EEC) and the low-voltage directive (73/23/EEC).
WARNINGS
The KPS 25sc must be placed on a firm. level surface where it is not exposed to dripping or splashing.
Do not remove or bypass the ground pin on the end of the AC power cord. This can cause radio frequency
interference (RFI) to be introduced into your playback system. Operate the KPS 25sc only with the power
cord supplied.
The ventilation grids on the top of the KPS 25sc must be unobstructed at all times during operation. Do not
place flammable material on top of or beneath the component.
Turn off all systems’ power before connecting the KPS 25sc to any component. Make sure all cable termina-
tions are of the highest quality, free from frayed ends, short circuits, or cold solder joints.
Connecting non-CAST components to CAST inputs or outputs can damage your equipment and void your war-
ranty.
Do not attempt to change CAST cable terminations or CAST inputs or outputs to RCA or XLR connectors. It is
electrically impossible to convert CAST input or output connections for balanced or single-ended voltage oper-
ation.
THERE ARE NO USER SERVICEABLE PARTS INSIDE ANY KRELL PRODUCT.
Please contact your authorized Krell dealer, distributor, or Krell if you have any questions not addressed in
this reference manual.
(-~--~equipped
This product is manufactured in the United States of America. Krell* is a registered trademark of Krell Industries. Inc.. and is restricted for use by Krell
Industries. inc.. its subsidiaries, and authorized agents. Krell Playback System
TM
is a trademark of Krell Industries. Inc. Krell CAST is a patent pending of
Krell Industries, inc. Krell Link
TM
is a trademark of Krell Industries. Inc. [-~----~-I, HDCD
’~.
High Definition Compatible Digital* and Pacific Microsonics
TM
are either registered trademarks or trademarks of Pacific Microson~cs. Inc. in the United States and/or other countries. HDCD system manufactured
under license from Pacific Microsonics. Inc. This product is covered by one or more of the following: In the USA: 5.479.168. 5,638,074, 5.640.161.
5,808,574. 5,838,274, 5.854,600, 5.864,311, 5,872,531, and in Australia: 669114, Other patents pending. TosLink
TM
is a trademark of Toshiba
Corporation. All other trademarks and tradenames are registered to their respective companies.
©2000 by Kretl Industries, Inc. All rights reserved
P/N 303963