Filter
Top Products
English
— 46 —
The following messages are displayed when certain problems are occurring in your system. Take the recommended
actions.
No disc magazine has been loaded in the changer. The disc magazine is not completely loaded.
] Load the disc magazine properly.
EJECT
No disc has been loaded in the disc magazine.
] Load a disc into the disc magazine.
NO DISC
The sound skips. The mounting angle exceeds 30°. Adjust to an angle of less than 30°.
The mounting is unstable. Anchor the unit securely. When the sound skips at the same
portion even when the car is stopped, the problem lies with
the CD.
SOLUTIONPOSSIBLE CAUSEPROBLEM
Troubleshooting Guide
Cannot play an MP3 file. Not conforming to ISO 9660 Level 1/2. Use a medium conforming to ISO 9660 Level 1/2.
The MP3 file has no or invalid filename extension. Add the ".MP3" extension to the MP3 file name.
Noise or no sound generated
when an MP3 file is played.
The file has the MP3 filename extension while it is not an
MP3 file.
Do not use the ".MP3" extension in non-MP3 files.
Takes time before the unit
starts playing MP3 files.
The medium contains many folders, files, and hierarchical
levels.
The unit checks all files on the loaded medium first. If the
medium has many files recorded, it may take a long time for
the unit before it starts playing MP3 files.
Fails to play MP3 files in the
intended order.
The MP3 files were not written by the CD writer in the
order in which you wanted them to be played.
Depending on the CD writer, you may be able to set the
order in which MP3 files are to be played by writing them
onto a medium with their file names beginning with play
sequence numbers such as "01" to "99".
The media is scratched or dirty. Clean the media, referring to the section on "Cleaning CDs"
(see p.8).
The sound skips when an MP3
file is being played.
The media is scratched or dirty. Clean the media, referring to the section on "Cleaning CDs"
(see p.8).