Filter
Top Products
— 14 —
English
General features
"BASS EXT" : Switch the Bass Extend mode on/off.
Setting values: ON / OFF
(When the bass extend mode is set to on, low
frequency response is extended by 20%.)
This mode is available only when the Sound coordinate system is
on. (page 35)
NOTE
"TRE f" : Adjust the center frequency of the treble.
Setting values: 10.0 / 12.5 / 15.0 / 17.5 kHz
This mode is available only when the Sound coordinate system is
on. (page 35)
NOTE
"TREBLE" : Adjust the treble level.
Setting values: - 6 – + 6
"BALANCE" : Adjust the balance level.
Setting values: Left 15 – Right 15
"FADER : Adjust the fader level.
Setting values: Front 15 – Rear 15
"N-F LV" : Adjust the Non-fading output level.
Setting values: - 35 – + 5
Storing your sound settings:
Press a preset button (#1-6) for at least two seconds except
during the bass center frequency, bass level, bass quality
factor, bass extension, treble center frequency, and treble level
adjust mode.
• This mode is available only when the Sound coordinate system
is on. (page 35)
• The settings you can preset are, bass center frequency, bass
level, bass quality factor, bass extension, treble center
frequency, and treble level.
NOTE
Recalling your sound settings:
Press a preset button (#1-6) except during the bass center
frequency, bass level, bass quality factor, bass extension,
treble center frequency, and treble level adjust mode.
This mode is available only when the Sound coordinate system is
on. (page 35)
NOTE
"AMP CTRL" : Set the amplifier bass increment.
Setting values: OFF/1/2
As of December 1998, the power amplifiers controllable by the
main unit are as follows:
KAC-X501F/PS501F/X401M/PS401M/X301T/PS301T/X201T/PS201T
NOTE