Filter
Top Products
— 16 —
English
Store the frequency of a station. You can then recall that
station with a single touch of a button.
Select the band/station that you want to have stored.
Press the button (#1-6) that you want to use for the station, for
at least two seconds.
The button number blinks once in the display to indicate that
the data has been stored.
You can store six stations in each of the FM1, FM2, FM3, and AM
bands.
NOTE
2
1
Station Preset Memory
Press the SRC (source) button repeatedly to select the tuner
mode. "TUNER" is displayed when the tuner mode has been
selected.
Press either the FM or AM button to select the band.
Each time you press the FM button, the band switches
between the FM1, FM2, and FM3.
Press the AM button to select the AM band.
• Auto Seek Tuning
Press the ¢ button for at least half a second to seek higher
frequencies.
Press the 4 button for at least half a second to seek lower
frequencies.
• Manual Tuning
Press the ¢ button to increase the frequency by one step.
Press the 4 button to decrease the frequency by one step.
The ST indicator lights up when stereo broadcasts are being
received.
NOTE
3
2
1
Tuning
Tuner features
¢
4
SRC
#1 - 6
AM/
CRSC
FM/
AME
DISP/
NAME.S
38
indicator
ST indicator
Frequency
Band display
Preset station number