Filter
Top Products
— 34 —
English
Function set system
This function produces a beep sound that accompanies button
operation. It can be switched on or off.
Display and setting:
"BEEP ON" : Beep setting is on.
"BEEP OFF" : Beep setting is off.
The beep sound is not output from the preout jacks.
NOTE
Touch Sensor Tone
You can dim the display.
Display and setting:
"DIMMER LOW" : The dimmer setting is low.
"DIMMER MIDDLE" : The dimmer setting is middle.
"DIMMER HIGH" : The dimmer setting is high.
The dimmer function is not available for units if the dimmer wire
is not connected.
NOTE
Dimmer
If you feel that display amount on the screen is too much, you
can reduce the display amount.
Display and setting:
"SILENT ON" : The silent display function setting is on.
"SILENT OFF" : The silent display function setting is off.
Silent Display
To accommodate a greater number of functions, a function set
system has been employed for making settings. Press the AUD
button to enter the function set mode and then display the
function to make the setting.
Press the SRC button repeatedly and switch the display to
“ALL OFF” to enter the standby mode.
Press the AUD button.
"FUNCTION SET" is displayed when the function set mode is
entered.
The function that you can adjust is indicated with the current
settings displayed.
Selecting function to set
Press the FM button to search through the functions until you
see the one you want to adjust in the display.
Press the AM button to search through the functions backward.
Example: If you want to switch the setting of the touch sensor
tone function from on to off, first search through the
functions until you see "BEEP ON"in the display.
Changing setting for currently displayed function
Press either the 4 or ¢ button.
The setting will change for each function.
Example: The setting of the touch sensor tone will switch from
on to off, and "BEEP OFF" is displayed.
Ending the function set mode
Press the AUD button.
5
4
3
2
1
Function Set System