Filter
Top Products
— 19 —
You can search for the station for any station if its name has
been preset using Station Name Preset.
Press the SBF button.
“SBF MODE” will be displayed once the station name preset
play mode is entered.
The names of the stations stored in the band currently listened
to are displayed in the following order for five seconds each:
Each time you press the ¢ button, the station display
switches in the forward direction.
Each time you press the 4 button, the station display
switches in the reverse direction.
Stations whose names have not been stored will be displayed
as frequencies.
Changing the Displayed Band
Pressing the FM button switches between the FM1, FM2, and
FM3 displays, in that order.
Pressing the AM button switches to the AM display.
Once the name is displayed for the station you want to listen
to
Press the OK button.
Reception starts of the displayed station, and the Station Name
Preset Play mode ends.
2
NOTE
= FM1 Ô FM2 Ô FM3 Ô AM +
1
Station Name Preset Play (SBF) (Function of Remote)
(See page 35)
Use the remote to select frequencies directly.
Select the band by pressing the FM or AM button.
Press the DIRECT button.
In the display, "----" blinks for 10 seconds.
If you make no input in the 10-second period, direct access
tuning is automatically canceled.
Enter the frequency of the desired station while the display is
blinking.
If you want to listen to an FM station at 92.1 MHz, for example,
press 9, 2, and 1.
If you want to listen to an AM station at 530 kHz, for example,
press 5, 3, and 0.
You cannot enter frequencies above or below what a band can
receive.
Canceling Direct Access Tuning:
Press the DIRECT button again.
NOTE
3
2
1
Direct Access Tuning (Function of Remote)
(See page 35)