Filter
Top Products
— 32 —
English
External TV control features
When the TV/CD player VZ907 is connected
When the TV/CD player VZ907 is connected, the TI button
appears on the Source control screen of the TV monitor.
Since the traffic information function is not installed in this unit,
you can not use the TI button on the TV monitor.
NOTE
You can automatically store all the receivable channels in the
band currently being listened to, and then recall them with the
touch of a button later. This function is especially useful when
you are travelling and do not know what stations are available.
Up to six channels can be stored this way.
Select the band for auto memory entry.
Press the AME button for at least two seconds to start auto
memory entry.
The numbers of the preset station buttons are shown in order.
When all the stations in a certain band are stored in the preset
memory, the auto memory entry stops. The tuner then plays
the last station received.
2
1
Auto Memory Entry
Store the channel of a TV station. You can then recall that
station with a single touch of a button.
Select the band/station that you want to have stored.
Press the button (#1-6) that you want to use for the station, for
at least two seconds.
The button number blinks once in the display to indicate that
the data has been stored.
You can store six stations in each of the TV1 and TV2 bands.
NOTE
2
1
Station Preset Memory
You can recall a station being preset in preset station buttons
(#1-6).
Recalling a Preset Station:
Press the preset station button (#1-6) for the desired station.
The number of the recalled station is displayed.
Preset Tuning
Press the SRC (source) button repeatedly to select the external
TV control mode.
"TV" is displayed when the external TV control mode has been
selected.
Selecting Bands and Video Inputs
Press the FM button to select the TV band.
Each time you press the FM button, the TV band switches
between the TV1,TV2,Video1, and Video2.
• Auto Seek Tuning (AUTO 1)
Press the ¢ button to seek increasing channels.
Press the 4 button to seek decreasing channels.
• Preset Station Seek Tuning (AUTO 2)
Press the ¢ button to move to the next preset station (the
one with the next highest number), and the 4 button to
move to the last preset station (the one with the next lowest
number).
• Manual Tuning (MANUAL)
Press the ¢ button to increase the channel by one step.
Press the 4 button to decrease the channel by one step.
You can select the Tuning mode of AUTO1, AUTO2, or MANUAL
at the television side. For details, please refer to the instruction
manual for the television.
NOTE
3
2
1
Tuning