Kenwood TM-V7E Stereo System User Manual


 
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
48
CALL/VFO SCAN
Use Call/VFO Scan to monitor both the Call channel and
the current VFO frequency on the selected band.
1 Select the desired band.
2 Press [VFO] to select VFO mode.
3 Press [CALL] (1 s) to start Call/VFO Scan.
The 1 MHz decimal blinks while scanning is in progress.
4 To quit Call/VFO Scan, press [BAND SEL] for the band
being scanned or [CALL].
When scanning the TX band, you can also press Mic
[PTT] to quit Scan.
CALL/MEMORY SCAN
Use Call/Memory Scan to monitor both the Call channel
and the memory channel last used.
1 Select the desired band.
2 Press [MR] to enter Memory Recall mode.
3 Press [CALL] (1 s) to start Call/Memory Scan.
The 1 MHz decimal blinks while scanning is in progress.
4 To quit Call/Memory Scan, press [BAND SEL] for the
band being scanned or [CALL].
When scanning the TX band, you can also press Mic
[PTT] to quit Scan.