Kenwood TM-V71E Stereo System User Manual


 
80
Playback
1 Press the PF key programmed as [VGS].
2 Press the key for the VGS channel number you want to play back: [F] (1),
[TONE] (2), [REV] (3), or [LOW] (4) (when the Conversation Recorder is
ON.)
The recording saved in the channel you selected is played back.
To end playback at any time, press [PF1] (CLR).
To exit, press
[VGS] again.
During playback, you can switch to any of recordings 1, 2, 3, or 4 by pressing the
appropriate key.
While playing a recording, you can transmit the recording by pressing the
[PTT] switch. (Continue holding the [PTT] switch until the entire recording is
transmitted.)
Playback Repeat
You can set messages to be repeatedly played back.
1 Enter Menu mode and access Menu 007 (PLAY.BK) {page 20}.
2 Set the the Playback Repeat function to ON or OFF.
Playback Repeat Interval
If the Playback Repeat function is activated, you can set a time interval for how
often the memo/message is played back.
1 Enter Menu mode and access Menu 008 (P.BK.INT) {page 20}.
2 Set the interval from 0 to 60 seconds.