Kenwood TM-V71E Stereo System User Manual


 
66
PROGRAMMABLE FUNCTION KEYS
n Transceiver Front Panel
There are 2 PF (Programmable Function) keys on the transceiver front panel:
PF1 and PF2. You can assign your own desired functions to these 2 keys.
1 Enter Menu mode and access Menu 507 (PF1) and/or Menu 508 (PF2)
{page 20}.
2 Set your desired function for the key. Programmable functions available
are: WX CH (Weather Channel)/ FR.BAND (Frequency bands)/ CTRL
(Control)/ MONI (Monitor)/ VGS (Voice recorder)/ VOICE (Voice
announcement)/ GRP.UP (Memory group up)/ MENU (Menu mode)/ MUTE
(Speaker Mute)/ SHIFT (Shift)/ DUAL (Dual Mode)/ M>V (Memory to VFO
Copy)/ 1750 (1750 Hz Tone).
n Microphone Keys
There are 4 microphone PF (Programmable Function) keys: [PF] (PF1), [MR]
(PF2), [VF0] (PF3) and [CALL] (PF4). You can assign your own desired
functions to these 4 keys.
1 Enter Menu mode and access Menu 509 (MIC.PF1) and/or Menu 510
(MIC. PF2) and/or Menu 511 (MIC. PF3) and/or Menu 512 (MIC. PF4)
{page 20}.
2 Set your desired function for the key. Programmable functions available
are: WX CH (Weather Channel)/ FR.BAND (Frequency bands)/ CTRL
(Control)/ MONI (Monitor)/ VGS (Voice recorder)/ VOICE (Voice
announcement)/ GRP.UP (Memory group up)/ MENU (Menu mode)/ MUTE
(Speaker Mute)/ SHIFT (Shift)/ DUAL (Dual Mode)/ M>V (Memory to VFO
Copy)/ VFO/ MR/ CALL/ MHz/ TONE/ REV (Reverse)/ LOW/ LOCK/ A/B
(Band Select A/ Band Select B)/ ENTER/ 1750 (1750 Hz Tone).