Kenwood TM-V71E Stereo System User Manual


 
9
u REV
Press [REV] to turn the Reverse function ON or OFF {page 30}. Press [REV]
(1s) to turn the Automatic Simplex Checker ON {page 30}. Press [F], [REV]
to enter Offset Direction selection mode. Each time you press [F], [REV], the
offset direction toggles as follows:
plus (+) direction –> minus (–) direction –> –7.6 MHz (E type only) –> OFF.
i LOW
Press [LOW] to toggle the transmit output power as follows: High Power (K,
E types only) –> Middle Power –> Low Power {page 70}. Press [F], [LOW] to
turn the Mute function ON or OFF {page 69}.
o PF1
Press [PF1] to activate its programmable function {page 66}. The default
function is “Frequency Band Select”.
!0 PF2
Press [PF2] to activate its programmable function {page 66}. The default
function is “Operation Band Select”.
!1 BAND SEL (VOL) Control
Rotate the [BAND SEL] control to adjust the speaker volume {page 14}.
Press the left [BAND SEL] to select the A band. Press the right [BAND SEL]
to select the B band. Press [BAND SEL] (1s) to toggle between single and
dual-band mode.
!2 SQL Control
Rotate the [SQL] control to adjust the squelch level. Clockwise opens the
squelch and counterclockwise tightens the squelch {page 68}.
!3 PM
Press [PM] to enters the PM (Programmable Memory) channel selection mode
{page 40}. Press [F], [PM] to enter PM Channel registration mode {page 40}.
!4
Press [ ] to turn the transceiver power ON and OFF.