Kenwood TM-V71E Stereo System User Manual


 
17
SELECTING A FREQUENCY BAND
You can change the default frequency bands for bands A and B.
1 Select band A or B by pressing the [BAND SEL] control or [PF2].
2 Press [F], [BAND SEL] of your selected band.
Each time you press [F], [BAND SEL], you cycle to the next frequency band.
The default setting of the
[PF1] key also allows you to cycle to the next frequency
band.
When masking a band {page 71}, you are restricted to using only the selectable
band.
When receiving 2 signals on the same band, the image interference, senstivity, etc.,
performance will decrease.
Band A: 118 >> 144 (default) >> 220 >> 300 >> 430/440 (MHz).
Band B: 144 >> 220 >> 300 >> 430/440 (default) >> 1200 (MHz).
Note:
u M4 type models do not have the following frequency bands available:
118, 220, 300, or 1200 (MHz).
u E and M4 type models use the 430 MHz band and K type models use the 440 MHz band.
Frequency ranges:
118 MHz: 118 ~ 135.995 MHz
144 MHz: 136 ~ 199.995 MHz
220 MHz: 200 ~ 299.995 MHz
300 MHz: 300 ~ 399.995 MHz
430/440 MHz: 400 ~ 523.995 MHz
1200 MHz: 800 ~ 1299.995 MHz
(excluding cellular band)