Kenwood KDC-X996 Stereo Receiver User Manual


  Open as PDF
of 45
 
71
|
KDC-X996/ KDC-BT952HD
English
|
72
Setting Parental Lock for Mature
contents
Your can turn on/o Parental Lock for the adult
channel.
Select Satellite Radio source
2
Enter Menu List mode
Press the [MENU] button.
Select the Parental lock item
Turn the [VOL] knob and press it when the
desired item is displayed.
Select “Settings” > “Parental Lock”.
Enter the pass code
Operation type Operation
Selection of numbers. Turn the [VOL] knob and press the [VOL]
knob.
Selection of column Turn the [VOL] knob and press the [VOL]
knob.
Determination of passcode Press the [VOL] button for at least 1
second.
⁄
• Thepasscodeissetto“0000”asdefault.
•
You can enter the passcode using the remote control.
Select the Mature channel setting item
Turn the [VOL] knob to select “Mature Set”,
and then press the [VOL] knob.
Turn on the Mature setting
Turn the [VOL] knob to select “ON” and then
press the [VOL] knob.
Selecting “OFF” and pressing the [VOL] knob will
turn off the Mature setting.
7
Exit Menu List mode
Press the [MENU] button for at least 1 second,
and then press it again briefly.
⁄
• If a Mature channel is selected with the Mature
setting turned on, the passcode input screen appears.
Programs on the selected channel can be received only
when the passcode is correct.
Parental Lock passcode setting
You can set a new pass code for Parental Lock
setting.
Select Satellite Radio source
2
Enter Menu List mode
Press the [MENU] button.
Select the Parental lock item
Turn the [VOL] knob and press it when the
desired item is displayed.
Select “Settings” > “Parental Lock”.
Enter the pass code
Operation type Operation
Selection of numbers. Turn the [VOL] knob and press the [VOL]
knob.
Selection of column Turn the [VOL] knob and press the [VOL]
knob.
Determination of passcode Press the [VOL] button for at least 1
second.
⁄
• Thepasscodeissetto“0000”asdefault.
•
You can enter the passcode using the remote control.
Select the Passcode set item
Turn the [VOL] knob to select “Passcode Set”,
and then press the [VOL] knob.
Enter a new pass code (first time)
Enter a new pass code in the same manner as
in step 4.
Enter the new pass code again (second time)
Enter the same pass code as that entered in
step 6.
The old pass code is changed to the new one and
“Completed” is displayed.
8
Exit Menu List mode
Press the [MENU] button for at least 1 second,
and then press it again briefly.
Instant Replay
You can replay last 30 minutes of current channel.
Enter the Instant Replay mode
Press the [38] button for at least 1 second.
“Instant Replay” is displayed.
The “IR” indicator stays lit during instant replay.
Start Instant Replay
Press the [38] button.
The songs are replayed starting with the song
played30minutesago.
During instant replay, you can perform the
following operations:
Operation type Operation
Pause and play Press the [38] button.
Music search Press the [
4] or [¢] button.
Fast Forward or Fast
Backward
Press the [
4] or [¢] button for at
least 1 second.
Exit the Instant Replay mode
Press the [38] button for at least 1 second.
“Live” is displayed, and then the on-air song is
received.
⁄
• Recorded data of the previously received channel is
cleared immediately when a different channel is received.
iTunes tagging
You can store the tag of the information about the
song being received, and send it to the connected
iPod. You can easily nd the song on the iTunes
Store according to the tag sent to the iPod.
Store the song information tag
Press the [PRESET] button for at least 1 second.
“
TAG
” will be indicated on the display when song
information can be registered.
“TAG Storing” is indicated on the display while a tag
is being stored in this unit. “TAG Stored” is indicated
on the display after a tag is stored.
When your iPod is connected to this unit, “TAG
Transferred” is shown on the display and a tag is
sent to the iPod.
⁄
• ThesongcorrespondingtothetagsenttotheiPodis
indicated in the playlist of the synchronized iTunes.
• Byclickingyourdesiredsongintheplaylist,youcan
easily find it on the iTunes Store and buy it from the
iTunes Store.
• A total of fifty song information tags can be stored in
this unit including the song information tags stored by
the function of the HD Radio tuner function mentioned
in <iTunes Tagging> (page 25).
When a tag has been sent to the iPod, the tag stored in
this unit is cleared.
• Select “ON” for “Tagging” as mentioned in <SiriusXM
tuner Setting> (page 65) when using this function.
• Thememoryusagecanbecheckedbyselecting the
“TAG Memory” setting mentioned in <SiriusXM tuner
Setting> (page 65).
SiriusXM Vehicle Connect Tuner Control
(optional tuner and service required)
 previous next