Kenwood KDC-X996 Stereo Receiver User Manual


  Open as PDF
of 45
 
31
|
KDC-X996/ KDC-BT952HD
English
|
32
Operation of hands-free phoning
Receiving a Call
Answering a Phone Call
Press the [ ] button.
⁄
• Thefollowingoperationsdisconnecttheline:
- Insert a CD.
- Connect a USB device.
• Thenameofthecallingpartyisdisplayedifithasalready
been registered in the Phone Book.
Rejecting an Incoming Call
Press the [SRC] button.
During a Call
Disconnecting a Call
Press the [ ] or [SRC] button.
Switching to the Private Mode
Press the [38] button.
Switches between Private talk (“PRIVATE”) and
Hands-free talk each time this button is pressed.
⁄
• Dependingonthetypeofyourcell-phone,switching
to the private talk mode may select the source that was
used before commencing the hands-free connection.
If this happens, the source cannot be switched back to
the hands-free talk mode by operating this unit. Operate
your cell-phone to return to the hands-free talk mode.
Adjusting the Voice Volume during a Call
Turn the [VOL] knob.
Call Waiting
Answering Another Incoming Call with the
Current Call Suspended
1
Press the [ ] button.
2
Turn the [VOL] knob and press it when the
desired item is displayed.
Select “Answer”.
Answering another Incoming Call after
Terminating the Current Call
Press the [ ] or [SRC] button.
Continuing the Current Call
1
Press the [ ] button.
2
Turn the [VOL] knob and press it when the
desired item is displayed.
Select “Reject”.
Answering the Waiting Call after Terminating
the Current Call
Press the [ ] or [SRC] button.
Switching between the Current Call and Waiting
Call
Press the [VOL] knob.
Each pressing of this knob switches the calling
party.
Other Functions
Clearing the Disconnection Message
Press the [ ] button.
“HF Disconnect” disappears.
SRC
4
VOL
¢
38
MENU
DISP
Making a Call
1
Enter Bluetooth mode
Press the [ ] button.
2
Select a dialing method
Turn the [VOL] knob and press it when the
desired item is displayed.
Display Overview
“Preset Call” Calling a number in the preset.
“Phonebook” Selecting the character to be searched for the
phone book.
“Outgoing Calls” Calling a number in the outgoing call list.
“Incoming Calls” Calling a number in the incoming call list.
“Missed Calls” Calling a number in the missed calls list.
“Number Dial” Making a call by entering phone number.
Operation method of each mode is described
below.
3
Exit the dialing method mode
Press the [ ] button.
Speed Dialing (Preset Dial)
1
Enter Bluetooth mode
Press the [ ] button.
2
Select the preset dial mode
Turn the [VOL] knob and press it when the
desired item is displayed.
Select “Preset call”.
3
Select the number you want to recall from the
memory
Turn the [VOL] knob and press it when the
desired item is displayed.
Select preset number.
Phone number is displayed.
4
Make a call
Press the [VOL] knob.
⁄
• Youneedtoregisterthepresetdialnumber.Referto
<Registering to the Preset Dial Number List> (page 34).
Calling a Number in the Phone Book
Dial the phone number in the phone book of your
cell phone.
If the phone book has not been downloaded to this
unit, operate the cell-phone to download it.
1
Enter Bluetooth mode
Press the [ ] button.
2
Select the Phone Book mode
Turn the [VOL] knob and press it when the
desired item is displayed.
Select “Phonebook”.
3
Select the character to be searched for
Operation type Operation
Move to the next character. Turn the [VOL] knob.
Determine the selected
character.
Press the [VOL] knob.
4
Select the name or phone number
Turn the [VOL] knob.
✍ Switching between Display Modes
Press the [DISP] button.
Pressing this button each time switches between
name and telephone number.
5
Make a call
Press the [VOL] knob.
⁄
• Duringsearch,anon-accentcharactersuchas“u”is
searched for instead of an accent character such as “ü”.
 previous next