Filter
Top Products
43
|
KDC-X996/ KDC-BT952HD
English
|
44
Clock and Other Functions
Theft Deterrent Faceplate
The faceplate of the unit can be detached and
taken with you, helping to deter theft.
Removing the Faceplate
1
Press the Release button.
Drop open the faceplate.
2
Drawing the faceplate to left side pull it to
forward and remove it.
¤
• Thefaceplateisaprecisionpieceofequipmentandcan
be damaged by shocks or jolts.
• Keepthefaceplateinitsfaceplatecasewhiledetached.
• Donotexposethefaceplate(andthefaceplatecase)to
direct sunlight or excessive heat or humidity. Also avoid
places with too much dust or the possibility of water
splashing.
Reattaching the Faceplate
1
Align the shaft on the unit with the depression
on the faceplate.
2
Push the faceplate in until it clicks.
The faceplate is locked in place, allowing you to
use the unit.
Initial Settings
You can select following Initial Setting items.
1
Select the Standby
Pressing the [SRC] button repeatedly switches
source.
Select the “STANDBY” display.
✍ SRC Select mode 2: Press the [SRC] button and
then turn the [VOL] knob. To determine the
selected source, press the [VOL] knob.
2
Enter Menu List mode
Press the [MENU] button.
3
Enter Initial Setting mode
Turn the [VOL] knob and press it when the
desired item is displayed.
Select “Initial Settings”.
4
Select the setting item to adjust
Turn the [VOL] knob.
Display Overview
“Initial Settings”
“SRC Select”
Sets the source selection method.
“Settings 1”/ “2”
“Beep”
Setting the operation check sound (beep sound)
ON/OFF.
“OFF”/ “ON”
“Menu Language”
You can select the display language for the
Menu list item.
“English”/ “Français”/ “Español”
“Pandora Source”
When this is set to ON, Pandora source can be
selected.
“ON”: Allows you to select Pandora source by
connecting an iPhone, iPod touch, Android or
BlackBerry (with the Pandora® internet radio
application).
“OFF”: Disable Pandora source selection.
“Built in AUX”
When this is set to ON, AUX source can be
selected.
“ON”: Allows AUX source to be selected. Use
this setting when the built-in AUX terminal
is connected to the external equipment all
the time.
“OFF”: Disable AUX source selection. Use this
setting when the built-in AUX terminal is
not used.
“Forced CD-DA”
Sets the method for reading CD.
“Settings 1”: Automatically distinguishes
between audio file disc and music CD when
playing disc.
“Settings 2”: Forces playing as music CD.
“Built in AMP”
Selecting “OFF” turns off the built-in amplifier.
Turning off the built-in amplifier improves the
quality of the sound from Preout.
“OFF”/ “ON”
“DSI” DSI (Disabled System Indicator) of the unit blinks
when the faceplate is removed.
“OFF”/ “ON”
“F/W Update” Updates the firmware. The update information
will be posted on the following URL as
necessary.
www.kenwood.com/cs/ce/
( : Factory setting)
5
Make a setting
Turn the [VOL] knob to select a setting value,
and then press the [VOL] knob.
6
Exit Menu List mode
Press the [MENU] button for at least 1 second,
and then press it again briefly.
Demonstration mode Setting
Turning the demonstration mode ON/OFF.
1
Enter Menu List mode
Press the [MENU] button.
2
Enter Demonstration mode setting
Turn the [VOL] knob and press it when the
desired item is displayed.
Select “DEMO Mode”.
3
Set the Demonstration mode
Turn the [VOL] knob and press it when the
desired item is displayed.
Select “ON” or “OFF”.
4
Exit Menu List mode
Press the [MENU] button.