Kenwood KDC-X996 Stereo Receiver User Manual


  Open as PDF
of 45
 
5
|
KDC-X996/ KDC-BT952HD
English
|
6
Before use
2WARNING
To prevent injury or fire, take the following
precautions:
To prevent a short circuit, never put or leave any
metallic objects (such as coins or metal tools) inside
the unit.
Do not use this unit before canceling
Demonstration mode!
This unit is initially set on the Demonstration mode.
When using this unit for the first time, cancel the
Demonstration mode. Refer to <Before Using> (page
8).
How to reset your unit
If this unit or the connected unit fails to operate
properly, press the Reset button. The unit returns to
factory settings when the Reset button is pressed.
Reset button
Connector
Cleaning the connector
The unit may not function properly if the connectors
between the unit and faceplate are dirty. Detach the
faceplate and clean the connector with a cotton swab
gently, being careful not to damage the connector.
Cleaning the Unit
If the faceplate of this unit is stained, wipe it with a
dry soft cloth such as a silicon cloth.
If the faceplate is stained badly, wipe the stain off with
a cloth moistened with neutral cleaner, then wipe it
again with a clean soft dry cloth.
¤
• Applyingspraycleanerdirectlytotheunitmayaffectits
mechanical parts. Wiping the faceplate with a hard cloth or
using a volatile liquid such as thinner or alcohol may scratch
the surface or erases characters.
Lens Fogging
When you turn on the car heater in cold weather,
dew or condensation may form on the lens in the
CD player of the unit. Called lens fogging, this
condensation on the lens may not allow CDs to play.
In such a situation, remove the disc and wait for the
condensation to evaporate. If the unit still does not
operate normally after a while, consult your Kenwood
dealer.
Notes
• Ifyouexperienceproblemsduringinstallation,
consult your Kenwood dealer.
• Whenyoupurchaseoptionalaccessories,checkwith
your Kenwood dealer to make sure that they work
with your model and in your area.
• CharactersthatconformtoISO8859-1canbe
displayed.
• TheRadioDataSystemfeaturewon’tworkwhere
the service is not supported by any broadcasting
station.
• Inthisdocument,thedescriptionindicatorwill
light means a status is displayed. Refer to <Basic
operations> (page 35) for the details of the status
display.
• Theillustrationsofthedisplayandthepanel
appearing in this manual are examples used to
explain more clearly how the controls are used.
Therefore, what appears on the display in the
illustrations may differ from what appears on the
display on the actual equipment, and some of the
illustrations on the display may be inapplicable.
Handling CDs
• DonottouchtherecordingsurfaceoftheCD.
• Donotsticktapeetc.ontheCD,oruseaCDwith
tape stuck on it.
• Donotusedisctypeaccessories.
• Cleanfromthecenterofthediscandmove
outward.
• WhenremovingCDsfromthisunit,pullthemout
horizontally.
• IftheCDcenterholeoroutsiderimhasburrs,
use the CD only after removing the burrs with a
ballpoint pen etc.
CDs that cannot be used
• CDsthatarenotroundcannotbeused.
• CDswithcoloringontherecordingsurfaceorCDs
that are dirty cannot be used.
• ThisunitcanonlyplaytheCDswith
.
This unit may not correctly play discs which do not
have the mark.
• YoucannotplayaCD-RorCD-RWthathasnot
been finalized. (For the finalization process refer to
your CD-R/CD-RW writing software, and your CD-R/
CD-RW recorder instruction manual.)
• 3inchCDcannotbeused.Attempttoinsertusing
an adapter can cause malfunction.
 previous next