Additional Information
Specifications
General
Power source ...................... 14.4 V DC
(10.8 – 15.1 V allowable)
Grounding system .............. Negative type
Max. current consumption
............................................. 10.0 A
Dimensions (W × H × D):
(When closed)
(DIN) Chassis ............ 178 × 50 × 157 mm
[7 × 2 × 6-1/8 in]
Nose .................. 188 × 58 × 28 mm
[7-3/8 × 2-1/4× 1-1/8 in]
(D) Chassis ............ 178 × 50 × 162 mm
[7 × 2 × 6-3/8 in]
Nose .................. 170 × 44 × 23 mm
[6-3/4 × 1-3/4× 7/8 in]
(When opened)
(DIN) Chassis ............ 178 × 50 × 157 mm
[7 × 2 × 6-1/8 in]
Nose .................. 188 × 68 × 50 mm
[7-3/8 × 2-5/8× 2 in]
(D) Chassis ............ 178 × 50 × 162 mm
[7 × 2 × 6-3/8 in]
Nose .................. 170 × 64 × 45 mm
[6-3/4 × 2-1/2× 1-3/4 in]
Weight ................................. 1.7 kg (3.74 lbs.)
Audio
Continuous power output is 22 W per channel min. into
4 ohms, both channels driven 50 to 15,000 Hz with no
more than 5% THD.
Maximum power output ..... 50 W × 4
for subwoofer (70 W × 1 ch/2 Ω)
Load impedance ................. 4 Ω (4 – 8 Ω [2 Ωfor 1 ch]
allowable)
Preout max output level/output impedance
............................................. 4 V/1 kΩ
Equalizer (3-Band Parametric Equalizer):
(Low)
Frequency ............ 40/80/100/160 Hz
Q Factor ............... 0.35/0.59/0.95/1.15
(+6 dB when boosted)
Gain .....................±12 dB
(Mid)
Frequency ............ 200/500/1 k/2 k Hz
Q Factor ............... 0.35/0.59/0.95/1.15
(+6 dB when boosted)
Gain .....................±12 dB
(High)
Frequency ............ 3.15 k/8 k/10 k/12.5 k Hz
Q Factor ............... 0.35/0.59/0.95/1.15
(+6 dB when boosted)
Gain .....................±12 dB
Loudness contour:
(Low) ............................ +3.5 dB (100 Hz)
+3 dB (10 kHz)
(Mid) ............................ +10 dB (100 Hz)
+6.5 dB (10 kHz)
(High) .......................... +11 dB (100 Hz)
+11 dB (10 kHz)
(Volume: –30 dB)
Tone controls:
(Bass)
Frequency ............ 40/63/100/160 Hz
Gain .....................±12 dB
(Treble)
Frequency ............ 2.5 k/4 k/6.3 k/10 k Hz
Gain .....................±12 dB
HPF:
Frequency ............ 50/80/125 Hz
Slope ....................–12 dB/oct
Subwoofer:
Frequency ............ 50/80/125 Hz
Slope ....................–18 dB/oct
Gain .....................±12 dB
Phase ...................Normal/Reverse
CD player
System ................................ Compact disc audio
system
Usable discs ....................... Compact disc
Signal format:
Sampling frequency ... 44.1 kHz
Number of quantization bits
..................................... 16; linear
Frequency characteristics
............................................. 5 – 20,000 Hz (±1 dB)
Signal-to-noise ratio ........... 94 dB (1 kHz)
(IHF-A network)
Dynamic range ................... 92 dB (1 kHz)
Number of channels .......... 2 (stereo)
MP3 decoding format ........ MPEG-1&2 Audio Layer-3
WMA decoding format........ Ver. 7 & 8
FM tuner
Frequency range ................. 87.9 – 107.9 MHz
Usable sensitivity ............... 9 dBf (0.8 µV/75 Ω, mono,
S/N:30 dB)
50 dB quieting sensitivity ... 15 dBf (1.5 µV/75 Ω, mono)
Signal-to-noise ratio ........... 70 dB (IHF-A network)
Distortion ............................ 0.3% (at 65 dBf, 1 kHz,
stereo)
Frequency response ........... 30 – 15,000 Hz (± 3 dB)
Stereo separation ............... 40 dB (at 65 dBf, 1 kHz)
Selectivity ............................ 70 dB
Three signal intermodulation
(Desire signal level) .... 30 dBf
(two undesire signal level: 100 dBf)
AM tuner
Frequency range ................. 530 – 1,710 kHz (10 kHz)
Usable sensitivity ............... 18 µV (S/N: 20 dB)
Selectivity ............................ 50 dB (± 10 kHz)
Note
• Specifications and the design are subject to
possible modifications without notice due to
improvements.
En
60
10
Section