Filter
Top Products
Initial Settings
En
45
Switching the warning tone
If the front panel is not detached from the head
unit within five seconds of turning off the igni-
tion, a warning tone will sound. You can turn off
this warning tone.
1 Press
OPEN to open the front panel.
2 Press FUNCTION to select WARN.
Press
FUNCTION until WARN appears in the
display.
3 Select WARN on or off with 5/∞.
Pressing 5/∞ will switch Warning between on
and off and that status will be displayed (e.g.,
Warning :ON).
Switching the flap auto open
For theft protection, the front panel opens auto-
matically and easily detaches. Flap auto open is
on as a default.
1 Press OPEN to open the front panel.
2 Press FUNCTION to select D OPEN.
Press FUNCTION until D OPEN appears in the
display.
3 Select Flap Auto on or off with 5/∞.
Pressing 5/∞ will switch Flap Auto between on
and off and that status will be displayed (e.g.,
Flap Auto :ON).
Switching the auxiliary setting
It is possible to use auxiliary equipment with
this unit. Activate the auxiliary setting when
using auxiliary equipment connected to this
unit.
1 Press
OPEN to open the front panel.
2 Press FUNCTION to select AUX.
Press
FUNCTION until AUX appears in the dis-
play.
3 Select AUX on or off with 5/∞.
Pressing 5/∞ will switch AUX between on and
off and that status will be displayed (e.g.,
AUX :ON).
Switching the dimmer setting
To prevent the display from being too bright at
night, the display is automatically dimmed
when the car’s headlights are turned on. You
can switch dimmer on or off.
1 Press OPEN to open the front panel.
2 Press FUNCTION to select DIM.
Press FUNCTION until DIM appears in the dis-
play.
3 Select DIM on or off with 5/∞.
Pressing 5/∞ will switch Dimmer between on
and off and that status will be displayed (e.g.,
Dimmer :ON).
English
Español
Deutsch
Français
Italiano
Nederlands
08
Section