Kenwood CRD3569-A CD Player User Manual


 
MP3/WMA Player
En
27
Scanning folders and tracks
While you are using T.SCAN (folder repeat), the
beginning of each track in the selected folder
plays for about 10 seconds. When you are using
F.SCAN (all repeat), the beginning of the first
track of each folder is played for about 10 sec-
onds.
1 Select the repeat range.
Refer to Repeating play on page 26.
2 Press
OPEN to open the front panel.
3 Press
FUNCTION
to select SCAN.
Press
FUNCTION until SCAN appears in the
display.
4 Press 5 to turn scan play on.
Scan :ON appears in the display. The first 10
seconds of each track of the present folder (or
the first track of each folder) is played.
5 When you find the desired track (or folder)
press to turn scan play off.
Scan :OFF appears in the display. The track (or
folder) will continue to play.
If the display has automatically returned to
the playback display, select SCAN again by
pressing FUNCTION.
Notes
Scan playback is cancelled if it returns to the
track (or folder) where it started.
During track repeat, if scan repeat is set to on,
the playback range changes to folder repeat,
and track scan is started.
Pausing MP3/WMA playback
Pause lets you temporarily stop playback of the
MP3/WMA.
1 Press
OPEN to open the front panel.
2 Press FUNCTION to select PAUSE.
Press
FUNCTION until PAUSE appears in the
display.
3 Press 5 to turn pause on.
Pause :ON appears in the display. Play of the
current track pauses.
4 Press to turn pause off.
Pause :OFF appears in the display. Play will
resume at the same point that you turned pause
on.
• Pressing PAUSE also turns pause on or off.
Displaying titles on MP3/WMA
1 Press OPEN to open the front panel.
2 Press DISPLAY when playing a MP3/WMA
disc.
Press DISPLAY repeatedly to switch between
the following settings:
PLAYBACK MODE A (play time)—Folder Name
(folder name)—File Name (file name)—Track
Title (track title)—Artist Name (artist name)—
Album Title (album title)—BIT RATE (bit rate)—
PLAYBACK MODE B (play time and DAB infor-
mation)
When playing back files recorded as VBR
(Variable Bit Rate) files, the BIT RATE value is
not displayed even after switching to BIT RATE.
If specific information has not been recorded
on a MP3/WMA disc, NO XXXX will be displayed
(e.g., NO Artist Name).
English
Español
Deutsch
Français
Italiano
Nederlands
05
Section