Filter
Top Products
09
Section
Setting the time display on or off
You can turn the time display on even when the
sources are off.
Press CLOCK
to select the time display.
Each press of
CLOCK turns time display on or
off. Time display appears on LCD display.
• The time display disappears temporarily when
you perform other operations, but the time indi-
cation is displayed again after 5 seconds.
Using different entertainment
displays
You can enjoy entertainment displays while
listening to each sound source.
• These are different ways of displaying the
spectrum and do not affect sound output.
1 Press
OPEN to open the front panel.
2 Press
ENTERTAINMENT.
Each time you press ENTERTAINMENTthe
display changes in the following order:
Source Icon Display—BGV 1—BGV 2—BGV 3—
BGV 4—BGV 5—BGV 6—Spectrum Analyzer 1—
Spectrum Analyzer 2—Level Indicator 1—
Level Indicator 2—Level Indicator 3—
Movie 1—Movie 2—Entertainment Clock
• BGV stands for Back Ground Visual.
Using the AUX source
An IP-BUS-RCA Interconnector such as the
CD-RB20 or CD-RB10 (sold separately) lets you
connect this unit to auxiliary equipment featur-
ing RCA output. For more details, refer to the
IP-BUS-RCA Interconnector owner‘s manual.
Selecting AUX as the source
Press SOURCE
to select AUX as the source.
Press
SOURCE until AUX appears in the display.
• If the auxiliary setting is not switched on, AUX
cannot be selected. For more details, see
Switching the auxiliary setting on page 45.
Setting the AUX title
The title displayed for the AUX source can be
changed.
1 Press
OPEN to open the front panel.
2 After you have selected
AUX as the source,
press FUNCTION and hold until TITLE appears
in the display.
3 Press 1 numbered button to select the
desired character type.
Press 1 numbered button repeatedly to switch
between the following character type:
Alphabet (Upper case), Numbers and Symbols—
Alphabet (Lower case)
• You can select to input Numbers and Symbols
by pressing 2 numbered button.
Other Functions
En
48