Filter
Top Products
Built-in CD Player
En
21
Playing tracks in a random order
Random play lets you play back tracks on the
CD in a random order.
1 Press
OPEN to open the front panel.
2 Press FUNCTION to select RDM.
Press
FUNCTION until RDM appears in the dis-
play.
3 Press 5 to turn random play on.
Random :ON appears in the display. Tracks will
play in a random order.
4 Press ∞ to turn random play off.
Random :OFF appears in the display. Tracks will
continue to play in order.
Scanning tracks of a CD
Scan play lets you hear the first 10 seconds of
each track on the CD.
1 Press OPEN to open the front panel.
2 Press FUNCTION to select T.S CA N .
Press FUNCTION until T.SCAN appears in the
display.
3 Press 5 to turn scan play on.
Track Scan:ON appears in the display. The first
10 seconds of each track is played.
4 When you find the desired track press ∞to
turn scan play off.
Track Scan:OFF appears in the display. The track
will continue to play.
• If the display has automatically returned to
the playback display, select T.SCAN again by
pressing FUNCTION.
Note
• After scanning of a CD is finished, normal
playback of the tracks will begin again.
Pausing CD playback
Pause lets you temporarily stop playback of the
CD.
1 Press OPEN to open the front panel.
2 Press FUNCTION
to select PAUSE.
Press
FUNCTION until PAUSE appears in the
display.
3 Press 5 to turn pause on.
Pause :ON appears in the display. Play of the
current track pauses.
4 Press ∞ to turn pause off.
Pause :OFF appears in the display. Play will
resume at the same point that you turned pause
on.
• Pressing PAUSE also turns pause on or off.
English
Español
Deutsch
Français
Italiano
Nederlands
04
Section