Kenwood CRD3569-A CD Player User Manual


 
07
Section
Audio Adjustments
En
39
English
Español
Deutsch
Français
Italiano
Nederlands
Recalling equalizer curves
There are seven stored equalizer curves which
you can easily recall at any time. Here is a list of
the equalizer curves:
Display Equalizer curve
SUPER BASS (S.BASS) Super bass
POWERFUL (PWFL) Powerful
NATURAL (NTRL) Natural
VOCAL (VOCAL) Vocal
CUSTOM1, 2 (CSTM1 (2)) Custom1, 2
FLAT (FLAT) Flat
CUSTOM1 and CUSTOM2 are adjusted equal-
izer curves.
A separate CUSTOM1 curve can be created
for each source. (The Built-in CD player and
Multi-CD player are set to the same Equalizer
Curve Adjustment setting automatically.)
If you make adjustments when a curve other
than CUSTOM2 is selected, the equalizer curve
settings are memorized in CUSTOM1.
•A CUSTOM2curve can be created common to
all sources.
If you make adjustments when the CUSTOM2
curve is selected, the CUSTOM2 curve is
updated.
• When FLAT is selected no supplement or
correction is made to the sound. This is useful
to check the effect of the equalizer curves by
switching alternatively between FLAT and a set
equalizer curve.
Press EQ to select the equalizer.
Press EQ repeatedly to switch between the fol-
lowing equalizer.
SUPER BASSPOWERFULNATURAL
VOCALCUSTOM1CUSTOM2FLAT
Adjusting equalizer curves
You can adjust the currently selected equalizer
curve setting as desired. Adjusted equalizer
curve settings are memorized in CUSTOM1 or
CUSTOM2.
1 Press OPEN to open the front panel.
2 Press AUDIO
to select the equalizer mode .
Press
AUDIO until EQ-Low/EQ-Mid/EQ-High
appears in the display.
3 Select the band you want to adjust with
2/3.
EQ-Low (low)—EQ-Mid (mid)—EQ-High (high)
4 Press 5 or to adjust the equalizer curve.
Each press of 5 or increases or decreases
the equalizer curve respectively.
+6 –6 is displayed as the equalizer curve is
increased or decreased.
Note
If you make adjustments when a curve other
than CUSTOM2 is selected, CUSTOM1 curve
is updated.