JVC RX-772VBK Stereo Receiver User Manual


 
Page 41
To change the transmittable signals for operating a CATV converter or satellite tuner
1. Set the remote control mode selector to the “CATV/SAT” position.
2. Press and hold TV/CATV/SAT POWER.
3. Press TV SOUND.
4. Enter the manufacturer’s code (three digits) using buttons 1 – 9, and 0.
See the lists on page 43 to find the code.
5. Release TV/CATV/SAT POWER.
After setting the remote control mode selector to the “CATV/SAT” position, you can perform the
following operations on the CATV converter or on the satellite tuner:
TV/CATV/SAT POWER: Turns on and off the CATV converter or satellite tuner.
CHANNEL +/–: Changes the channels.
1 – 10, 0, +10: Selects the channels.
+10 button will function as the ENTER button if your CATV converter or
satellite tuner requires pressing ENTER after selecting a channel number.
Note:
Refer also to the manual supplied with your CATV converter or satellite tuner.
6. Try to operate your CATV converter or satellite tuner by pressing TV/CATV/SAT POWER.
When your CATV converter or satellite tuner turns on or off, you have entered the correct code.
7. If there are more than one code listed for your brand of CATV converter or satellite tuner, try
each one until the correct one is entered.
To change the transmittable signals for operating another manufacturer’s VCR
1. Set the remote control mode selector to the “AUDIO/TV/VCR” position.
2. Press and hold VCR POWER.
3. Press VCR.
4. Enter the manufacturer’s code (three digits) using buttons 1 – 9, and 0.
See the lists on page 44 to find the code.
5. Release VCR POWER.
The following buttons can be used for operating the VCR:
VCR POWER: Turns on and off VCR.
After pressing VCR or VCR CONTROL (with the remote control mode selector set to the “AUDIO/TV/
VCR” position), you can perform the following operations on the VCR:
CHANNEL +/–: Changes the channels on the VCR.
1 – 10, 0, +10: Selects the channels on the VCR.
+10 button will function as the ENTER button if your VCR requires pressing
ENTER after selecting a channel number.
PLAY: Starts playback.
STOP: Stops operations.
PAUSE: Pauses.
REW: Rewinds a tape.
FF: Fast winds a tape.
REC
: Starts recording or enters recording pause.
Notes:
You can use either the VCR button or the VCR CONTROL button to activate the buttons listed above.
If you press VCR, the playing source also changes to “VCR.” On the other hand, if you press VCR
CONTROL, the playing source does not change to “VCR.”
Refer also to the manual supplied with your VCR.
6. Try to operate your VCR by pressing VCR POWER.
When your VCR turns on or off, you have entered the correct code.
7. If there are more than one code listed for your brand of VCR, try each one until the correct one
is entered.
O
N
S
C
R
E
E
N
C
O
N
T
R
O
L
RM-SR772U REMOTE CONTROL
/SAT POWER
CD
DISC
CD
TRACK
SOUND
CONTROL
VCR
POWER
AUDIO
POWER
SLEEP
VIDEO TAPEVCR
TV
SOUND
TEST REAR
SEA MODE SURR MODE
FM/AM PHONOCD
546
213
87
/P
9
0
+10
10
AUDIO/TV
/VCR
MENU
EXIT
MENU
TAPE VCR
CONTROL
VOLUME
CHANNEL
MUTE
FF / ¢
PLAY
STOP
REC
TV/VIDEO
TV VOLUME
PAUSE
4 /
REW
TV/CATV
CNTRDELAY
CATV
/SAT
FM MODE/MUTE
100+
RETURN
ONE TOUCH
OPERATION
O
N
S
C
R
E
E
N
C
O
N
T
R
O
L
RM-SR772U REMOTE CONTROL
/SAT POWER
CD
DISC
CD
TRACK
SOUND
CONTROL
VCR
POWER
AUDIO
POWER
SLEEP
VIDEO TAPEVCR
TV
SOUND
TEST REAR
SEA MODE SURR MODE
FM/AM PHONOCD
546
213
87
/P
9
0
+10
10
AUDIO/TV
/VCR
MENU
EXIT
MENU
TAPE VCR
CONTROL
VOLUME
CHANNEL
MUTE
FF / ¢
PLAY
STOP
REC
TV/VIDEO
TV VOLUME
PAUSE
4 /
REW
TV/CATV
CNTRDELAY
CATV
/SAT
FM MODE/MUTE
100+
RETURN
ONE TOUCH
OPERATION
RX-772VBK[J]_0052-001A.En.38-48 97.4.8, 3:28 PM41