JVC RX-772VBK Stereo Receiver User Manual


 
Page 34
Selecting the Surround Modes (Also see pages 24)
1. Press MENU.
The MAIN MENU appears on the TV.
2. Press
%%
%%
% /
to move
to “SURROUND,” then press
@@
@@
@ /
##
##
#.
The SURROUND MODE menu appears.
3. Press
%%
%%
% /
to move
to one of the surround modes.
If you want to adjust the selected mode, go to the following steps.
4. Press MENU.
The MAIN MENU appears on the TV again.
5. Press
%%
%%
% /
to move to “SURROUND ADJUST,” then press
@@
@@
@ /
##
##
#.
The adjustment menu for the mode you have selected in step 3 appears.
6. Press
%%
%%
% /
to move
to the item you want to set or adjust, then press
@@
@@
@ /
##
##
#.
On these adjustment menus, you can do the following:
For HALL:
“REAR”: Adjust the rear speaker output level.
“DELAY”: Adjust the delay time of the rear speaker sound.
For Dolby Pro Logic:
“CENTER MODE”: Select the center mode.
“TEST”: Output a test tone.
“CENTER”: Adjust the center speaker output level.
“REAR”: Adjust the rear speaker output level.
“DELAY”: Adjust the delay time of the rear speaker sound.
“CENTER TONE”: Select the center tone.
For Dolby 3ch Logic:
“CENTER MODE”: Select the center mode.
“TEST”: Output a test tone.
“CENTER”: Adjust the center speaker output level.
“CENTER TONE”: Select the center tone.
7. When you finish, press MENU EXIT.
The menu disappears from the TV.
PRO LOGIC adjustment menu
3CH LOGIC adjustment menu
HALL adjustment menu
SURROUND MODE menu
RX-772VBK[J]_0052-001A.En.31-37 97.4.8, 3:27 PM34