Filter
Top Products
Page 40
Operating Other Manufacturers’ VCR, TV, CATV Converter, and Satellite Tuners
This remote control supplied with the receiver can transmit control signals for other manufacturers’ VCRs,
TVs and CATV converters. By changing the transmittable signals from preset ones to the other manufacturers’,
you can operate the other manufacturer’s components using this remote control.
When operating the other manufacturers’ components, refer also to the manuals supplied with them.
To operate these components with the remote control, first you need to set the manufacturer’s code each for
VCR, TV, CATV converters, and satellite tuner.
IMPORTANT
When using the Remote Control, check to see if its remote control mode selector is set to the
correct position:
To operate an audio system, TV, and VCR, set it to the “AUDIO/TV/VCR” position.
To operate a CATV converter and satellite tuner, set it to the “CATV/SAT” position.
To change the transmittable signals for operating another manufacturer’s TV
1. Set the remote control mode selector to the “AUDIO/TV/VCR” position.
2. Press and hold TV/CATV/SAT POWER.
3. Press TV SOUND.
4. Enter the manufacturer’s code (three digits) using buttons 1 – 9, and 0.
See the lists on page 42 to find the code.
5. Release TV/CATV/SAT POWER.
The following buttons can be used for operating the TV (with the remote control mode selector set to
the “AUDIO/TV/VCR” position):
TV/CATV/SAT POWER: Turns on and off TV.
After pressing TV SOUND you can perform the following operations on the TV:
CHANNEL +/–: Changes the channels.
TV VOLUME +/–: Adjusts the volume.
1 – 10, 0, +10: Selects the TV channels.
+10 button will function as the ENTER button if your TV requires pressing
ENTER after selecting a channel number.
TV/VIDEO: Sets the input mode (either TV or VIDEO).
Note:
Refer also to the manual supplied with your TV.
6. Try to operate your TV by pressing TV/CATV/SAT POWER.
When your TV turns on or off, you have entered the correct code.
7. If there are more than one code listed for your brand of TV, try each one until the correct one is
entered.
AUDIO/TV
/VCR
CATV
/SAT
O
N
S
C
R
E
E
N
C
O
N
T
R
O
L
RM-SR772U REMOTE CONTROL
/SAT POWER
CD
DISC
CD
TRACK
SOUND
CONTROL
VCR
POWER
AUDIO
POWER
SLEEP
VIDEO TAPEVCR
TV
SOUND
TEST REAR
SEA MODE SURR MODE
FM/AM PHONOCD
546
213
87
/P
9
0
+10
10
AUDIO/TV
/VCR
MENU
EXIT
MENU
TAPE VCR
CONTROL
VOLUME
CHANNEL
MUTE
FF / ¢
PLAY
STOP
REC
TV/VIDEO
TV VOLUME
PAUSE
4 /
REW
TV/CATV
CNTRDELAY
CATV
/SAT
FM MODE/MUTE
100+
RETURN
ONE TOUCH
OPERATION
RX-772VBK[J]_0052-001A.En.38-48 97.4.8, 3:28 PM40